Translation

NuclearReactor__EmergencyCoolingTooltip
English
Cooling is deployed in case the reactor starts to overheat, and that typically happens when water is not supplied fast enough to be converted into steam (or steam output gets stuck). Cooling is not mandatory if you are not using automatic power regulation. However, it is highly recommended to have it as it provides extra protection and helps to avoid any potential overheating.
115/3790 · 379
Context English Chinese (Simplified)
NotifyIfFarmBufferFull Notify if cannot store more 如果无法存储更多的话，发通知
NotifyOnLowReserve Notify if reserve is low 当库存低时发出通知
NoTreeSaplingsForPlanter__name {entity} has no tree saplings to plant trees with 没有树苗可供{entity}种植
NoTreesToHarvest__name {entity} has no trees to harvest {entity} 没有可采伐的树木
NoTruckAssignedToTreeHarvester__name {entity} has no truck assigned {entity}没有被分配卡车
NoVehicleDepotAvailable There is no operational vehicle depot that can accept this type of vehicle 没有接受此类车辆的可运营的车厂
NoVehiclesAssigned No vehicles assigned 未分配车辆
NoWaterDisease__desc Bacterial disease spread through contaminated water. To prevent this disease in the future, make sure your settlement has stable supply of clean water. 细菌性疾病通过受污染的水传播。为了预防这种疾病，请确保您的住区有稳定的清洁水供应。
NoWaterDisease__name Cholera 霍乱
NoWaterDisease_Reason low water supply 供水不足
NuclearReactor__AutoThrottle Enable automatic regulation 开启自动调节
NuclearReactor__AutoThrottle_Tooltip If enabled, the reactor will regulate the target power based on the heat demand. The automated regulation will never go above the target power level (selected on the slider above). It also can't go below the first level (shutting the reactor down). The automation relies on the cooling loop; without it a rapid change in reactor's heat could lead to a meltdown. This regulation requires computing in order to operate. 若启用，反应堆将根据热量需求调节目标功率。自动调节永远不会超过目标功率等级（在上面的滑块上设置），也不能低于第一级（会导致反应堆关闭）。自动调整通过冷却循环实现；没有它，热量的快速变化可能会导致反应堆的熔毁。该调节功能需要消耗算力。
NuclearReactor__desc Thermal reactor that maintains nuclear chain reaction from enriched uranium rods. The reaction releases a large amount of energy utilized for steam generation. This plant can be set up to effectively provide up to {0} MW of electricity when running on full power. Beware that spent fuel is radioactive and can harm the population if not stored in a specialized facility. 维持来自浓缩铀棒的核链式反应的热核反应堆。该反应释放出大量用于产生蒸汽的能量。该工厂可以设置成在全功率运行时能有效提供高达 {0} MW 的电力。请注意，乏燃料具有放射性，如果不储存在专门的设备中，会对人造成伤害。
NuclearReactor__DisableBeforeUpgrade The reactor needs to be turned off before upgrading 反应堆升级前需要先关闭
NuclearReactor__EmergencyCoolingTitle Cooling 冷却
NuclearReactor__EmergencyCoolingTooltip Cooling is deployed in case the reactor starts to overheat, and that typically happens when water is not supplied fast enough to be converted into steam (or steam output gets stuck). Cooling is not mandatory if you are not using automatic power regulation. However, it is highly recommended to have it as it provides extra protection and helps to avoid any potential overheating. 冷却一般会在反应堆开始过热时使用，这通常发生在供水不够快, 无法转化为蒸汽的情况下（或者蒸汽输出堵住了）。当你没有使用自动能量调节时，冷却不是强制性的。但强烈建议在该情况下开启，因为它可以提供额外的保护，有助于避免任何潜在的过热。
NuclearReactor__EnrichmentTitle Enrichment 浓缩
NuclearReactor__EnrichmentTooltip If input is provided, it will be enriched into fissile fuel. The enrichment process is optional and does not affect reactor's fuel economy. Keeping the enriched output buffer full does not affect operation of the reactor. 如果提供输入，它将被浓缩成裂变燃料。浓缩过程是可选的，不会影响反应堆的燃料效率。裂变燃料缓存达上限并不会影响反应堆的运行。
NuclearReactor__HeatLevelNoRadiationSuffix This reactor has advanced safety feature that prevents radiation leaks on overheat but its fuel content will be lost. 该反应堆具有高级的安全特性，可防止过热时的辐射泄漏，但会损失全部燃料。
NuclearReactor__HeatLevelRadiationSuffix Overheat will also cause significant radiation leak into the area. 过热还会导致大量辐射泄漏到该区域。
NuclearReactor__HeatLevelTitle Reactor heat 反应堆热量
NuclearReactor__HeatLevelTooltip The current heat that has built up in the reactor. Heat is necessary to produce steam to run turbines. The pace of heat generation depends on the current power level of the reactor. When the heat reaches above the red marker, emergency cooling will try to reduce excess heat in the reactor. If the heat level goes beyond the heat bar maximum, the reactor will critically overheat, damaging the reactor and releasing radiation into the area. 当前在反应堆中积聚的热量。热量是产生蒸汽来运行涡轮机所必需的。热量产生的速度取决于反应堆的当前功率水平。当热量达到红色标记以上时，紧急冷却将会减少反应堆中的多余热量。如果热量水平超过加热棒的最大值，反应堆将会严重过热，损坏反应堆并向该区域释放辐射。
NuclearReactor__name Nuclear reactor 核反应堆
NuclearReactor__NotEnoughMaintenance Nuclear reactor cannot start if it is not well maintained. Increase maintenance in order to safely start it. 如果维护不当，核反应堆将无法启动。增加维护以安全启动。
NuclearReactor__Overheated Nuclear reactor was critically overheated and is shutting down. Depending on severity, this may cause loss of loaded fuel, damage to the building (loss of maintenance), and leak of radiation. 核反应堆严重过热，正在关闭。根据严重程度，可能会导致装载的燃料损失、建筑物损坏（维护损失）和放射性泄漏。
NuclearReactor__PowerLevelTitle Power level 功率水平
NuclearReactor__PowerLevelTooltip By dragging the orange slider to the right, you define the desired power level maintained in the reactor. This affects the amount of steam the reactor generates and how fast it burns through the fuel. All the heat generated needs to be used. Any extra heat can slowly build up, eventually leading to a reactor overheating. Basic reactors don’t have automated power regulation which makes their heat output fixed. 通过向右拖动橙色滑块，你可以定义反应堆需要保持的功率水平。这会影响反应堆产生的蒸汽量以及它燃烧燃料的速度。所有产生的热量都需要被使用。任何一点额外的热量都会慢慢积聚，最终导致反应堆过热。基本反应堆没有自动功率调节的功能，这使得它们的热量输出是固定的。
NuclearReactorInMeltdown__name Nuclear reactor reached critical temperature and is shutting down! 核反应堆达到临界温度，正在关闭！
NuclearReactorRods__MinRequired Requires at least {0} unit of fuel to operate 至少需要 {0}单位燃料
NuclearReactorRods__StatusTitle Fuel in reactor 反应堆中的燃料
NuclearReactorRods__Tooltip The reactor will operate as long as it is supplied the minimum amount of fuel shown below. When fuel is depleted it will be replaced with a new one and spent fuel or any other corresponding product will be returned. 只要提供如下所示的最少数量的燃料，反应堆就会运行。当燃料耗尽时，它将被新的替换，乏燃料或其他对应产品将被返还。
Context English Chinese (Simplified)
NoVehiclesAssigned No vehicles assigned 未分配车辆
NoWaterDisease_Reason low water supply 供水不足
NoWaterDisease__desc Bacterial disease spread through contaminated water. To prevent this disease in the future, make sure your settlement has stable supply of clean water. 细菌性疾病通过受污染的水传播。为了预防这种疾病，请确保您的住区有稳定的清洁水供应。
NoWaterDisease__name Cholera 霍乱
NuclearReactorInMeltdown__name Nuclear reactor reached critical temperature and is shutting down! 核反应堆达到临界温度，正在关闭！
NuclearReactorRods__MinRequired Requires at least {0} unit of fuel to operate 至少需要 {0}单位燃料
NuclearReactorRods__StatusTitle Fuel in reactor 反应堆中的燃料
NuclearReactorRods__Tooltip The reactor will operate as long as it is supplied the minimum amount of fuel shown below. When fuel is depleted it will be replaced with a new one and spent fuel or any other corresponding product will be returned. 只要提供如下所示的最少数量的燃料，反应堆就会运行。当燃料耗尽时，它将被新的替换，乏燃料或其他对应产品将被返还。
NuclearReactorT2__desc Advanced thermal reactor that provides increased throughput. This reactor is also able to utilize MOX fuel. It can also regulate its power level automatically (if computing is provided). This plant can be set up to effectively provide up to {0} MW of electricity when running on full power. 提供更高吞吐量的高级热反应堆。该反应堆还能够使用 MOX 燃料。它还可以自动调节其功率水平（如果提供算力）。该电厂可以设置为在全功率运行时有效地提供高达 {0} MW 的电力。
NuclearReactorT2__name Nuclear reactor II 核反应堆 2
NuclearReactor__AutoThrottle Enable automatic regulation 开启自动调节
NuclearReactor__AutoThrottle_Tooltip If enabled, the reactor will regulate the target power based on the heat demand. The automated regulation will never go above the target power level (selected on the slider above). It also can't go below the first level (shutting the reactor down). The automation relies on the cooling loop; without it a rapid change in reactor's heat could lead to a meltdown. This regulation requires computing in order to operate. 若启用，反应堆将根据热量需求调节目标功率。自动调节永远不会超过目标功率等级（在上面的滑块上设置），也不能低于第一级（会导致反应堆关闭）。自动调整通过冷却循环实现；没有它，热量的快速变化可能会导致反应堆的熔毁。该调节功能需要消耗算力。
NuclearReactor__desc Thermal reactor that maintains nuclear chain reaction from enriched uranium rods. The reaction releases a large amount of energy utilized for steam generation. This plant can be set up to effectively provide up to {0} MW of electricity when running on full power. Beware that spent fuel is radioactive and can harm the population if not stored in a specialized facility. 维持来自浓缩铀棒的核链式反应的热核反应堆。该反应释放出大量用于产生蒸汽的能量。该工厂可以设置成在全功率运行时能有效提供高达 {0} MW 的电力。请注意，乏燃料具有放射性，如果不储存在专门的设备中，会对人造成伤害。
NuclearReactor__DisableBeforeUpgrade The reactor needs to be turned off before upgrading 反应堆升级前需要先关闭
NuclearReactor__EmergencyCoolingTitle Cooling 冷却
NuclearReactor__EmergencyCoolingTooltip Cooling is deployed in case the reactor starts to overheat, and that typically happens when water is not supplied fast enough to be converted into steam (or steam output gets stuck). Cooling is not mandatory if you are not using automatic power regulation. However, it is highly recommended to have it as it provides extra protection and helps to avoid any potential overheating. 冷却一般会在反应堆开始过热时使用，这通常发生在供水不够快, 无法转化为蒸汽的情况下（或者蒸汽输出堵住了）。当你没有使用自动能量调节时，冷却不是强制性的。但强烈建议在该情况下开启，因为它可以提供额外的保护，有助于避免任何潜在的过热。
NuclearReactor__EnrichmentTitle Enrichment 浓缩
NuclearReactor__EnrichmentTooltip If input is provided, it will be enriched into fissile fuel. The enrichment process is optional and does not affect reactor's fuel economy. Keeping the enriched output buffer full does not affect operation of the reactor. 如果提供输入，它将被浓缩成裂变燃料。浓缩过程是可选的，不会影响反应堆的燃料效率。裂变燃料缓存达上限并不会影响反应堆的运行。
NuclearReactor__HeatLevelNoRadiationSuffix This reactor has advanced safety feature that prevents radiation leaks on overheat but its fuel content will be lost. 该反应堆具有高级的安全特性，可防止过热时的辐射泄漏，但会损失全部燃料。
NuclearReactor__HeatLevelRadiationSuffix Overheat will also cause significant radiation leak into the area. 过热还会导致大量辐射泄漏到该区域。
NuclearReactor__HeatLevelTitle Reactor heat 反应堆热量
NuclearReactor__HeatLevelTooltip The current heat that has built up in the reactor. Heat is necessary to produce steam to run turbines. The pace of heat generation depends on the current power level of the reactor. When the heat reaches above the red marker, emergency cooling will try to reduce excess heat in the reactor. If the heat level goes beyond the heat bar maximum, the reactor will critically overheat, damaging the reactor and releasing radiation into the area. 当前在反应堆中积聚的热量。热量是产生蒸汽来运行涡轮机所必需的。热量产生的速度取决于反应堆的当前功率水平。当热量达到红色标记以上时，紧急冷却将会减少反应堆中的多余热量。如果热量水平超过加热棒的最大值，反应堆将会严重过热，损坏反应堆并向该区域释放辐射。
NuclearReactor__name Nuclear reactor 核反应堆
NuclearReactor__NotEnoughMaintenance Nuclear reactor cannot start if it is not well maintained. Increase maintenance in order to safely start it. 如果维护不当，核反应堆将无法启动。增加维护以安全启动。
NuclearReactor__Overheated Nuclear reactor was critically overheated and is shutting down. Depending on severity, this may cause loss of loaded fuel, damage to the building (loss of maintenance), and leak of radiation. 核反应堆严重过热，正在关闭。根据严重程度，可能会导致装载的燃料损失、建筑物损坏（维护损失）和放射性泄漏。
NuclearReactor__PowerLevelTitle Power level 功率水平
NuclearReactor__PowerLevelTooltip By dragging the orange slider to the right, you define the desired power level maintained in the reactor. This affects the amount of steam the reactor generates and how fast it burns through the fuel. All the heat generated needs to be used. Any extra heat can slowly build up, eventually leading to a reactor overheating. Basic reactors don’t have automated power regulation which makes their heat output fixed. 通过向右拖动橙色滑块，你可以定义反应堆需要保持的功率水平。这会影响反应堆产生的蒸汽量以及它燃烧燃料的速度。所有产生的热量都需要被使用。任何一点额外的热量都会慢慢积聚，最终导致反应堆过热。基本反应堆没有自动功率调节的功能，这使得它们的热量输出是固定的。
NuclearReprocessingPlant__desc A complex facility which reprocesses radioactive material by isolating fission products (material that is no longer fissile and would slow down reaction if left in a reactor). Isolated waste decays faster, allowing it to be disposed of in a reasonable time span. The isolated waste is vitrified using molten glass into a solid form for easier storage. 一种复杂的设施，通过分离裂变产物（不再裂变的材料，如果留在反应堆中会减慢反应速度）来再处理放射性物质。孤立的废料衰变得更快，可以在合理的时间内处理掉。使用熔融玻璃将分离出的废料玻璃化成固体形式，以便于储存。
NuclearReprocessingPlant__name Nuclear reprocessing plant 核后处理厂
NuclearWasteStorage__desc A special underground storage facility that can safely manage any radioactive waste without causing any danger to the island’s population. Leaving a legacy for the next generations to come. 一种特殊的地下储存设备，可以安全地管理任何放射性废料而不会对岛上的居民造成任何危险。为子孙后代留下一份遗产。
Context English Chinese (Simplified)
NuclearReactor__AutoThrottle Enable automatic regulation 开启自动调节
NuclearReactor__AutoThrottle_Tooltip If enabled, the reactor will regulate the target power based on the heat demand. The automated regulation will never go above the target power level (selected on the slider above). It also can't go below the first level (shutting the reactor down). The automation relies on the cooling loop; without it a rapid change in reactor's heat could lead to a meltdown. This regulation requires computing in order to operate. 若启用，反应堆将根据热量需求调节目标功率。自动调节永远不会超过目标功率等级（在上面的滑块上设置），也不能低于第一级（会导致反应堆关闭）。自动调整通过冷却循环实现；没有它，热量的快速变化可能会导致反应堆的熔毁。该调节功能需要消耗算力。
NuclearReactor__desc Thermal reactor that maintains nuclear chain reaction from enriched uranium rods. The reaction releases a large amount of energy utilized for steam generation. This plant can be set up to effectively provide up to {0} MW of electricity when running on full power. Beware that spent fuel is radioactive and can harm the population if not stored in a specialized facility. 维持来自浓缩铀棒的核链式反应的热核反应堆。该反应释放出大量用于产生蒸汽的能量。该工厂可以设置成在全功率运行时能有效提供高达 {0} MW 的电力。请注意，乏燃料具有放射性，如果不储存在专门的设备中，会对人造成伤害。
NuclearReactor__DisableBeforeUpgrade The reactor needs to be turned off before upgrading 反应堆升级前需要先关闭
NuclearReactor__EmergencyCoolingTitle Cooling 冷却
NuclearReactor__EmergencyCoolingTooltip Cooling is deployed in case the reactor starts to overheat, and that typically happens when water is not supplied fast enough to be converted into steam (or steam output gets stuck). Cooling is not mandatory if you are not using automatic power regulation. However, it is highly recommended to have it as it provides extra protection and helps to avoid any potential overheating. 冷却一般会在反应堆开始过热时使用，这通常发生在供水不够快, 无法转化为蒸汽的情况下（或者蒸汽输出堵住了）。当你没有使用自动能量调节时，冷却不是强制性的。但强烈建议在该情况下开启，因为它可以提供额外的保护，有助于避免任何潜在的过热。
NuclearReactor__EnrichmentTitle Enrichment 浓缩
NuclearReactor__EnrichmentTooltip If input is provided, it will be enriched into fissile fuel. The enrichment process is optional and does not affect reactor's fuel economy. Keeping the enriched output buffer full does not affect operation of the reactor. 如果提供输入，它将被浓缩成裂变燃料。浓缩过程是可选的，不会影响反应堆的燃料效率。裂变燃料缓存达上限并不会影响反应堆的运行。
NuclearReactor__HeatLevelNoRadiationSuffix This reactor has advanced safety feature that prevents radiation leaks on overheat but its fuel content will be lost. 该反应堆具有高级的安全特性，可防止过热时的辐射泄漏，但会损失全部燃料。
NuclearReactor__HeatLevelRadiationSuffix Overheat will also cause significant radiation leak into the area. 过热还会导致大量辐射泄漏到该区域。
NuclearReactor__HeatLevelTitle Reactor heat 反应堆热量
NuclearReactor__HeatLevelTooltip The current heat that has built up in the reactor. Heat is necessary to produce steam to run turbines. The pace of heat generation depends on the current power level of the reactor. When the heat reaches above the red marker, emergency cooling will try to reduce excess heat in the reactor. If the heat level goes beyond the heat bar maximum, the reactor will critically overheat, damaging the reactor and releasing radiation into the area. 当前在反应堆中积聚的热量。热量是产生蒸汽来运行涡轮机所必需的。热量产生的速度取决于反应堆的当前功率水平。当热量达到红色标记以上时，紧急冷却将会减少反应堆中的多余热量。如果热量水平超过加热棒的最大值，反应堆将会严重过热，损坏反应堆并向该区域释放辐射。
NuclearReactor__name Nuclear reactor 核反应堆
NuclearReactor__NotEnoughMaintenance Nuclear reactor cannot start if it is not well maintained. Increase maintenance in order to safely start it. 如果维护不当，核反应堆将无法启动。增加维护以安全启动。
NuclearReactor__Overheated Nuclear reactor was critically overheated and is shutting down. Depending on severity, this may cause loss of loaded fuel, damage to the building (loss of maintenance), and leak of radiation. 核反应堆严重过热，正在关闭。根据严重程度，可能会导致装载的燃料损失、建筑物损坏（维护损失）和放射性泄漏。
NuclearReactor__PowerLevelTitle Power level 功率水平
NuclearReactor__PowerLevelTooltip By dragging the orange slider to the right, you define the desired power level maintained in the reactor. This affects the amount of steam the reactor generates and how fast it burns through the fuel. All the heat generated needs to be used. Any extra heat can slowly build up, eventually leading to a reactor overheating. Basic reactors don’t have automated power regulation which makes their heat output fixed. 通过向右拖动橙色滑块，你可以定义反应堆需要保持的功率水平。这会影响反应堆产生的蒸汽量以及它燃烧燃料的速度。所有产生的热量都需要被使用。任何一点额外的热量都会慢慢积聚，最终导致反应堆过热。基本反应堆没有自动功率调节的功能，这使得它们的热量输出是固定的。
User avatar struggletostudy

Suggestion added

冷却一般会在反应堆开始过热时使用。这通常发生在供水不够快，无法转化为蒸汽的情况下（或者蒸汽输出堵住了）。当你没有启用自动能量调节时，冷却不是强制性的。但强烈建议在该情况下开启，因为它可以提供额外的保护，有助于避免任何潜在的过热。

Suggested change:

冷却一般会在反应堆开始过热时使用，。这通常发生在供水不够快, ，无法转化为蒸汽的情况下（或者蒸汽输出堵住了）。当你没有使启用自动能量调节时，冷却不是强制性的。但强烈建议在该情况下开启，因为它可以提供额外的保护，有助于避免任何潜在的过热。
a year ago

Loading…

User avatar struggletostudy

Suggestion added

Captain of Industry / Game — Chinese (Simplified)

Cooling is deployed in case the reactor starts to overheat, and that typically happens when water is not supplied fast enough to be converted into steam (or steam output gets stuck). Cooling is not mandatory if you are not using automatic power regulation. However, it is highly recommended to have it as it provides extra protection and helps to avoid any potential overheating.
冷却一般会在反应堆开始过热时使用。这通常发生在供水不够快，无法转化为蒸汽的情况下（或者蒸汽输出堵住了）。当你没有启用自动能量调节时，冷却不是强制性的。但强烈建议在该情况下开启，因为它可以提供额外的保护，有助于避免任何潜在的过热。
a year ago
User avatar redsquirrel

Suggestion accepted

Captain of Industry / Game — Chinese (Simplified)

Cooling is deployed in case the reactor starts to overheat, and that typically happens when water is not supplied fast enough to be converted into steam (or steam output gets stuck). Cooling is not mandatory if you are not using automatic power regulation. However, it is highly recommended to have it as it provides extra protection and helps to avoid any potential overheating.
冷却一般会在反应堆开始过热的情况下部署紧急冷却时使用，这通常发生在供水不够快, 无法转化为蒸汽的情况下。紧急（或者蒸汽输出堵住了）。当你没有使用自动能量调节时，冷却不是强制性的，。但强烈建议在该情况下部署开启，因为它可以提供额外的保护并，有助于避免任何潜在的过热。
a year ago
User avatar baicao021

Suggestion added

Captain of Industry / Game — Chinese (Simplified)

Cooling is deployed in case the reactor starts to overheat, and that typically happens when water is not supplied fast enough to be converted into steam (or steam output gets stuck). Cooling is not mandatory if you are not using automatic power regulation. However, it is highly recommended to have it as it provides extra protection and helps to avoid any potential overheating.
冷却一般会在反应堆开始过热时使用，这通常发生在供水不够快, 无法转化为蒸汽的情况下（或者蒸汽输出堵住了）。当你没有使用自动能量调节时，冷却不是强制性的。但强烈建议在该情况下开启，因为它可以提供额外的保护，有助于避免任何潜在的过热。
a year ago
User avatar None

Source string changed

Captain of Industry / Game — Chinese (Simplified)

Emergency cCooling is deployed in case the reactor starts to overheat, and that typically happens when water is not supplied fast enough to be converted into steam. Emergency cooling is not mandatory but is highly advised (or steam output gets stuck). Cooling is not mandatory if you are not using automatic power regulation. However, it is highly recommended to have it as it provides extra protection and helps to avoid any potential overheating.
a year ago
User avatar redsquirrel

Translation changed

Captain of Industry / Game — Chinese (Simplified)

Cooling is deployed in case the reactor starts to overheat, and that typically happens when water is not supplied fast enough to be converted into steam (or steam output gets stuck). Cooling is not mandatory if you are not using automatic power regulation. However, it is highly recommended to have it as it provides extra protection and helps to avoid any potential overheating.
Emergency cooling is deployed in case the reactor starts to overheat, and that typically happens when water is not supplied fast enough to be converted into steam. Emergency cooling is not mandatory but is highly advised as it provides extra protection and helps to avoid any potential overheating.在反应堆开始过热的情况下部署紧急冷却，这通常发生在供水不够快, 无法转化为蒸汽的情况下。紧急冷却不是强制性的，但强烈建议在该情况下部署，因为它提供额外的保护并有助于避免任何潜在的过热。
2 years ago
User avatar captainFilip

Bulk status change

Captain of Industry / Game — Chinese (Simplified)

Cooling is deployed in case the reactor starts to overheat, and that typically happens when water is not supplied fast enough to be converted into steam (or steam output gets stuck). Cooling is not mandatory if you are not using automatic power regulation. However, it is highly recommended to have it as it provides extra protection and helps to avoid any potential overheating.
Emergency cooling is deployed in case the reactor starts to overheat, and that typically happens when water is not supplied fast enough to be converted into steam. Emergency cooling is not mandatory but is highly advised as it provides extra protection and helps to avoid any potential overheating.
2 years ago
Browse all component changes

Things to check

Suggestions

There is 1 suggestion for this string.

View

Variants

There are 17 variants of this string.

View

Glossary

English Chinese (Simplified)
No related strings found in the glossary.

String information

Context
NuclearReactor__EmergencyCoolingTooltip
Source string comment
String age
2 years ago
Source string age
2 years ago
Translation file
zh_Hans.po, string 1468