Captain of Industry/Game — Chinese (Traditional) @ Captain of Industry: Trucks can go under any conveyors or pipes that are …

Translation

Context TutorialOnTransports2__height

English {0} = 2, {1} = Ramp

Chinese (Traditional)

Needs editing

Context	English	Chinese (Traditional)
TutorialOnTerDumping__colorsDesc4	<b>darkened green square</b>: already fulfilled and will be ignored	<b>暗綠色方塊</b>：已滿足規劃，將被忽略
TutorialOnTerDumping__colorsDesc5	The numbers on the designation indicate the height of the terrain level.	規劃格子表面的數字代表地形高度。
TutorialOnTerDumping__part1	To dump materials on the terrain, select the <b>dumping designation tool</b> {0} in the bottom toolbar (1). Hover over the terrain to see your starting direction and elevation of the tool (2). Left click and drag to create a dumping designation (3). Important is that <b>dump designations should start at or below terrain</b>, otherwise they cannot be accessed by trucks.	要將物料倒在地面上，請在底部工具列中選取<b>傾卸規劃工具</b>{0}(1)。將鼠標懸停在地形上，以查看工具的起始方向和高度(2)。左鍵點擊並拖動以創建一個傾卸規劃區(3)。需要注意的是<b>傾卸規劃區應從目前地形或其以下的高度開始</b>，否則卡車將會無法抵達。
TutorialOnTerDumping__part10	The {0} has the option to filter what products can be dumped within its managed area. This managed area ignores the global dumping filter which is ideal for restricting what materials can be dumped. For example, you can only allow {1} to be dumped in a specific area by removing it from the global dumping filter and adding it to dumpable products in the {0} window.	{0}具有選擇其管理範圍內可以傾倒哪些產品的選項。此管理區域會忽略全局傾倒過濾器，該篩選器是限制可傾倒材料的理想方式。例如，你可以只允許在特定區域內傾倒{1}，只需從全局傾倒篩選器中刪除它，並將其添加到{0}視窗中的可傾倒產品中。
TutorialOnTerDumping__part10Heading	{0} dumping filter	{0}傾倒篩選器
TutorialOnTerDumping__part2	Dumping designations show what the terrain will look like when completed.	傾卸規劃區顯示當傾卸工作完成後地形將會是什麼樣子。
TutorialOnTerDumping__part3	The {0} key will toggle the designation tool between a sloped designation (1) for placing terrain in an ascending / descending ramp and flat designation (2).	按{0}鍵可將規劃工具在斜坡規劃(1)（用於將地形設置為上升或者下降的斜坡）和平坦規劃(2)之間切換。
TutorialOnTerDumping__part4	The {0} key (1) will rotate ramp designations clockwise to choose which direction the slope will go. When snapped to another designation the {0} key just toggles the slope (2).	按{0}鍵(1)可使斜坡規劃順時針旋轉，以選擇斜坡的方向。當附到另一個規劃時，按{0}鍵將只會切換斜坡的上下(2)。
TutorialOnTerDumping__part5	The {0} and {1} keys (1) will raise (2) and lower (3) the designation respectively, allowing you to control the target height. Remember that dumping designations with all edges above the terrain cannot be accessed by trucks.	按{0}鍵和{1}鍵(1)可分別提升(2)和降低(3)規劃的高低，這樣您就可以控制規劃範圍的目標高度。請記住，邊緣全部高於地形的規劃範圍是無法被卡車抵達的。
TutorialOnTerDumping__part7	Trucks dump products automatically. If there is a dumpable product that needs to be disposed of and no machine or storage that accepts it, trucks will automatically navigate to the nearest designation to dump it.	卡車會自動傾倒產品。如果有需要處理的可傾倒產品，並且沒有可以接收該產品的機器或儲存設施，卡車將自動導航至最近的規劃範圍進行傾倒。
TutorialOnTerDumping__part8	There are many products that can be dumped. If you are ever curious if a product can be dumped, open the <b>Recipes screen</b> {0} by clicking on the icon in the bottom right (1), navigate to the product (2), and check if dumping is an option for consumption (3).	有許多產品可以被傾倒。如果您對某個產品是否可以傾倒有疑問，只需點擊右下角的圖標打開<b>配方</b>{0}畫面(1)，找到該產品(2)，並檢查是否有傾倒作為消耗選項(3)。
TutorialOnTerDumping__part8Heading	What can be dumped	什麼可以傾倒
TutorialOnTerDumping__part9	Global dump filters choose what products can be dumped in designated areas across the island by default. For example, if you only wanted {0} and {1} used as dumping materials, you could remove any other products listed there besides those two.	全局傾倒篩選器可選擇哪些產品可以預設傾倒在島上的傾卸規劃內。例如，如果你只想讓{0}和{1}被用作傾倒材料，你可以從列表中刪除其它的產品，只保留這兩種。
TutorialOnTerDumping__part9Heading	Global dump filters	全域傾倒篩選器
TutorialOnTransports__name	Pipes & conveyor belts	管道和輸送帶
TutorialOnTransports2__height	Trucks can go under any conveyors or pipes that are at height {0} or higher. However, taller vehicles such as excavators cannot go under them. In order to let taller vehicles pass, you must build a {1}.	卡車可以在高度為 {0} 或更高的輸送帶或管道下方行駛。但是，挖土機等較高的車輛無法在其下方行駛。為了讓更高的車輛通過，您必須建造一個 {1}。
TutorialOnTransports2__part1	Transports (pipes and conveyor belts) are an alternative way of transporting products around your factory. They reduce demands on your truck logistics and make product deliveries more steady.	運輸裝置（管道和輸送帶）是在工廠周圍運輸產品的另一種方式。它們減少了對卡車物流的需求，並使產品交付更加穩定。
TutorialOnTransports2__part2	You can see which products are making trucks the most busy in the {0} tab.	您可以在 {0} 標籤中查看哪些產品使卡車最繁忙。
TutorialOnTransports2__part3	Split and merge transports by simply connecting them to each other. If you need control over priorities and ratios, research {0} to get balancers with advanced capabilities.	可以簡單地將運輸裝置拆開、合併來互相連接。如果您需要控制優先順序和比率，請研究 {0} 以獲得有高級功能的平衡器。
TutorialOnTransports2__part4	You can also start building a transport by hovering over the red/green arrow next to a building/transport port while the construction menu is open.	當建造選單打開時，您還可以將游標懸停在建築物/運輸港口旁邊的紅色/綠色箭頭上，來開始建造運輸裝置。
TutorialOnTransports2__part5	Most of the transports (except {0}) <b>can go up/down</b> by pressing {1} keys during the design process. This is handy when trying to make space for vehicles to go under.	大多數運輸裝置（{0} 除外）<b>可以通過在設計過程中按 {1} 鍵來上/下</b>移動。這可以騰出空間讓車輛從運輸裝置下方通過。
TutorialOnTransports2__part7	You can build transports <b>stacked on top of each other</b>. To make it easier, toggle {0} key while placing a transport to <b>prevent it from snapping</b> to any existing one.	您可以建造運輸裝置讓他們<b>彼此堆疊</b>。為方便起見，在放置運輸裝置時切換 {0} 鍵以<b>防止它吸附</b>到任何現有的運輸裝置上。
TutorialOnTreesPlanting__name	Tree planting	植樹
TutorialOnTreesPlanting__part1	Tree planting provides a renewable source of wood. To start, you need to obtain <b>tree saplings</b> by growing them on <b>farms</b>.	植樹提供可再生的木材資源。要開始種植，您需要透過在 <b>農場</b>上培育它們來獲取<b>樹苗</b>。
TutorialOnTreesPlanting__part2	A {0} is required to designate tree replanting zones. It has an area which is the working space where the assigned vehicles will operate. It can be changed similarly as in {2}. To plant & harvest trees, you need to place forestry designations inside the area by clicking on {1}.	需要使用{0}來指定樹木重新種植區域。它具有工作空間，指定的車輛將在其中進行操作。您可以使用與{2}相似的方式進行更改。要種植和收穫樹木，請點擊{1}即可在該區域內設定伐木範圍。
TutorialOnTreesPlanting__part3	You also need to build a vehicle called {0} and assign it to the {1}. Once tree saplings are available, the {0} automatically picks them up and plants them onto the designations.	您還需要建造一輛叫做{0}的載具，並將其分配給{1}。一旦樹苗可用，{0}將自動將其收集並種植在伐木區上。
TutorialOnTreesPlanting__part4	Tree harvesters will automatically cut down fully grown trees as long as the trees are situated on tower’s designations.	只要樹木位於林業塔的指定區域內，伐木機將自動砍伐已經長成的樹木。
TutorialOnTreesPlanting__part5	You can also place trees manually to have them planted exactly where you want. The available types of trees can be found in the build menu. Manually placed trees are planted by the {0} as well.	您也可以手動放置樹木，使其在您希望的位置種植。可用的樹木類型可以在建造菜單中找到。手動放置的樹木也將由{0}進行種植。
TutorialOnTrucks__name	Trucks	卡車
TutorialOnTrucks__part1	Trucks are the most versatile option to transport products around the island. They can transport almost every product except molten materials or hot gasses such as steam.	卡車是在島上運輸產品最通用的選擇。它們幾乎可以運輸除熔融材料或熱氣體（如蒸汽）之外的所有產品。
TutorialOnTrucks__part2	Anytime there is a machine that needs a product, trucks will try to find a source and deliver it. The same goes for construction.	任何時候但凡有機器需要產品時，卡車都會嘗試尋找貨源並運送。建造時也是如此。

Context	English	Chinese (Traditional)
TutorialOnTerDumping__colorsDesc3	<b>yellow green square with a red outline</b>: is not accessible yet	<b>帶紅色邊框的黃綠色方塊</b>：暫時未能抵達
TutorialOnTerDumping__colorsDesc4	<b>darkened green square</b>: already fulfilled and will be ignored	<b>暗綠色方塊</b>：已滿足規劃，將被忽略
TutorialOnTerDumping__colorsDesc5	The numbers on the designation indicate the height of the terrain level.	規劃格子表面的數字代表地形高度。
TutorialOnTerDumping__part1	To dump materials on the terrain, select the <b>dumping designation tool</b> {0} in the bottom toolbar (1). Hover over the terrain to see your starting direction and elevation of the tool (2). Left click and drag to create a dumping designation (3). Important is that <b>dump designations should start at or below terrain</b>, otherwise they cannot be accessed by trucks.	要將物料倒在地面上，請在底部工具列中選取<b>傾卸規劃工具</b>{0}(1)。將鼠標懸停在地形上，以查看工具的起始方向和高度(2)。左鍵點擊並拖動以創建一個傾卸規劃區(3)。需要注意的是<b>傾卸規劃區應從目前地形或其以下的高度開始</b>，否則卡車將會無法抵達。
TutorialOnTerDumping__part10	The {0} has the option to filter what products can be dumped within its managed area. This managed area ignores the global dumping filter which is ideal for restricting what materials can be dumped. For example, you can only allow {1} to be dumped in a specific area by removing it from the global dumping filter and adding it to dumpable products in the {0} window.	{0}具有選擇其管理範圍內可以傾倒哪些產品的選項。此管理區域會忽略全局傾倒過濾器，該篩選器是限制可傾倒材料的理想方式。例如，你可以只允許在特定區域內傾倒{1}，只需從全局傾倒篩選器中刪除它，並將其添加到{0}視窗中的可傾倒產品中。
TutorialOnTerDumping__part10Heading	{0} dumping filter	{0}傾倒篩選器
TutorialOnTerDumping__part2	Dumping designations show what the terrain will look like when completed.	傾卸規劃區顯示當傾卸工作完成後地形將會是什麼樣子。
TutorialOnTerDumping__part3	The {0} key will toggle the designation tool between a sloped designation (1) for placing terrain in an ascending / descending ramp and flat designation (2).	按{0}鍵可將規劃工具在斜坡規劃(1)（用於將地形設置為上升或者下降的斜坡）和平坦規劃(2)之間切換。
TutorialOnTerDumping__part4	The {0} key (1) will rotate ramp designations clockwise to choose which direction the slope will go. When snapped to another designation the {0} key just toggles the slope (2).	按{0}鍵(1)可使斜坡規劃順時針旋轉，以選擇斜坡的方向。當附到另一個規劃時，按{0}鍵將只會切換斜坡的上下(2)。
TutorialOnTerDumping__part5	The {0} and {1} keys (1) will raise (2) and lower (3) the designation respectively, allowing you to control the target height. Remember that dumping designations with all edges above the terrain cannot be accessed by trucks.	按{0}鍵和{1}鍵(1)可分別提升(2)和降低(3)規劃的高低，這樣您就可以控制規劃範圍的目標高度。請記住，邊緣全部高於地形的規劃範圍是無法被卡車抵達的。
TutorialOnTerDumping__part7	Trucks dump products automatically. If there is a dumpable product that needs to be disposed of and no machine or storage that accepts it, trucks will automatically navigate to the nearest designation to dump it.	卡車會自動傾倒產品。如果有需要處理的可傾倒產品，並且沒有可以接收該產品的機器或儲存設施，卡車將自動導航至最近的規劃範圍進行傾倒。
TutorialOnTerDumping__part8	There are many products that can be dumped. If you are ever curious if a product can be dumped, open the <b>Recipes screen</b> {0} by clicking on the icon in the bottom right (1), navigate to the product (2), and check if dumping is an option for consumption (3).	有許多產品可以被傾倒。如果您對某個產品是否可以傾倒有疑問，只需點擊右下角的圖標打開<b>配方</b>{0}畫面(1)，找到該產品(2)，並檢查是否有傾倒作為消耗選項(3)。
TutorialOnTerDumping__part8Heading	What can be dumped	什麼可以傾倒
TutorialOnTerDumping__part9	Global dump filters choose what products can be dumped in designated areas across the island by default. For example, if you only wanted {0} and {1} used as dumping materials, you could remove any other products listed there besides those two.	全局傾倒篩選器可選擇哪些產品可以預設傾倒在島上的傾卸規劃內。例如，如果你只想讓{0}和{1}被用作傾倒材料，你可以從列表中刪除其它的產品，只保留這兩種。
TutorialOnTerDumping__part9Heading	Global dump filters	全域傾倒篩選器
TutorialOnTransports2__height	Trucks can go under any conveyors or pipes that are at height {0} or higher. However, taller vehicles such as excavators cannot go under them. In order to let taller vehicles pass, you must build a {1}.	卡車可以在高度為 {0} 或更高的輸送帶或管道下方行駛。但是，挖土機等較高的車輛無法在其下方行駛。為了讓更高的車輛通過，您必須建造一個 {1}。
TutorialOnTransports2__part1	Transports (pipes and conveyor belts) are an alternative way of transporting products around your factory. They reduce demands on your truck logistics and make product deliveries more steady.	運輸裝置（管道和輸送帶）是在工廠周圍運輸產品的另一種方式。它們減少了對卡車物流的需求，並使產品交付更加穩定。
TutorialOnTransports2__part2	You can see which products are making trucks the most busy in the {0} tab.	您可以在 {0} 標籤中查看哪些產品使卡車最繁忙。
TutorialOnTransports2__part3	Split and merge transports by simply connecting them to each other. If you need control over priorities and ratios, research {0} to get balancers with advanced capabilities.	可以簡單地將運輸裝置拆開、合併來互相連接。如果您需要控制優先順序和比率，請研究 {0} 以獲得有高級功能的平衡器。
TutorialOnTransports2__part4	You can also start building a transport by hovering over the red/green arrow next to a building/transport port while the construction menu is open.	當建造選單打開時，您還可以將游標懸停在建築物/運輸港口旁邊的紅色/綠色箭頭上，來開始建造運輸裝置。
TutorialOnTransports2__part5	Most of the transports (except {0}) <b>can go up/down</b> by pressing {1} keys during the design process. This is handy when trying to make space for vehicles to go under.	大多數運輸裝置（{0} 除外）<b>可以通過在設計過程中按 {1} 鍵來上/下</b>移動。這可以騰出空間讓車輛從運輸裝置下方通過。
TutorialOnTransports2__part7	You can build transports <b>stacked on top of each other</b>. To make it easier, toggle {0} key while placing a transport to <b>prevent it from snapping</b> to any existing one.	您可以建造運輸裝置讓他們<b>彼此堆疊</b>。為方便起見，在放置運輸裝置時切換 {0} 鍵以<b>防止它吸附</b>到任何現有的運輸裝置上。
TutorialOnTransports__name	Pipes & conveyor belts	管道和輸送帶
TutorialOnTreesPlanting__name	Tree planting	植樹
TutorialOnTreesPlanting__part1	Tree planting provides a renewable source of wood. To start, you need to obtain <b>tree saplings</b> by growing them on <b>farms</b>.	植樹提供可再生的木材資源。要開始種植，您需要透過在 <b>農場</b>上培育它們來獲取<b>樹苗</b>。
TutorialOnTreesPlanting__part2	A {0} is required to designate tree replanting zones. It has an area which is the working space where the assigned vehicles will operate. It can be changed similarly as in {2}. To plant & harvest trees, you need to place forestry designations inside the area by clicking on {1}.	需要使用{0}來指定樹木重新種植區域。它具有工作空間，指定的車輛將在其中進行操作。您可以使用與{2}相似的方式進行更改。要種植和收穫樹木，請點擊{1}即可在該區域內設定伐木範圍。
TutorialOnTreesPlanting__part3	You also need to build a vehicle called {0} and assign it to the {1}. Once tree saplings are available, the {0} automatically picks them up and plants them onto the designations.	您還需要建造一輛叫做{0}的載具，並將其分配給{1}。一旦樹苗可用，{0}將自動將其收集並種植在伐木區上。
TutorialOnTreesPlanting__part4	Tree harvesters will automatically cut down fully grown trees as long as the trees are situated on tower’s designations.	只要樹木位於林業塔的指定區域內，伐木機將自動砍伐已經長成的樹木。
TutorialOnTreesPlanting__part5	You can also place trees manually to have them planted exactly where you want. The available types of trees can be found in the build menu. Manually placed trees are planted by the {0} as well.	您也可以手動放置樹木，使其在您希望的位置種植。可用的樹木類型可以在建造菜單中找到。手動放置的樹木也將由{0}進行種植。
TutorialOnTrucks__name	Trucks	卡車

Context	English	Chinese (Traditional)
TutorialOnTransports2__height	Trucks can go under any conveyors or pipes that are at height {0} or higher. However, taller vehicles such as excavators cannot go under them. In order to let taller vehicles pass, you must build a {1}.	卡車可以在高度為 {0} 或更高的輸送帶或管道下方行駛。但是，挖土機等較高的車輛無法在其下方行駛。為了讓更高的車輛通過，您必須建造一個 {1}。
TutorialOnTransports2__part1	Transports (pipes and conveyor belts) are an alternative way of transporting products around your factory. They reduce demands on your truck logistics and make product deliveries more steady.	運輸裝置（管道和輸送帶）是在工廠周圍運輸產品的另一種方式。它們減少了對卡車物流的需求，並使產品交付更加穩定。
TutorialOnTransports2__part2	You can see which products are making trucks the most busy in the {0} tab.	您可以在 {0} 標籤中查看哪些產品使卡車最繁忙。
TutorialOnTransports2__part3	Split and merge transports by simply connecting them to each other. If you need control over priorities and ratios, research {0} to get balancers with advanced capabilities.	可以簡單地將運輸裝置拆開、合併來互相連接。如果您需要控制優先順序和比率，請研究 {0} 以獲得有高級功能的平衡器。
TutorialOnTransports2__part4	You can also start building a transport by hovering over the red/green arrow next to a building/transport port while the construction menu is open.	當建造選單打開時，您還可以將游標懸停在建築物/運輸港口旁邊的紅色/綠色箭頭上，來開始建造運輸裝置。
TutorialOnTransports2__part5	Most of the transports (except {0}) <b>can go up/down</b> by pressing {1} keys during the design process. This is handy when trying to make space for vehicles to go under.	大多數運輸裝置（{0} 除外）<b>可以通過在設計過程中按 {1} 鍵來上/下</b>移動。這可以騰出空間讓車輛從運輸裝置下方通過。
TutorialOnTransports2__part7	You can build transports <b>stacked on top of each other</b>. To make it easier, toggle {0} key while placing a transport to <b>prevent it from snapping</b> to any existing one.	您可以建造運輸裝置讓他們<b>彼此堆疊</b>。為方便起見，在放置運輸裝置時切換 {0} 鍵以<b>防止它吸附</b>到任何現有的運輸裝置上。