Translation

TutorialOnCrisis__part2
English
Context English Portuguese
TutorialOnCoalPower__part1 A more efficient way of generating power compared to diesel generators is a coal power plant. Coal burned in boilers turns water into steam (1). This steam then spins turbines (2) and transfers mechanical force over a shaft into attached power generators (3) which make electricity from it.
TutorialOnCoalPower__part2 It does not matter how you order your turbines and generators, as long as they are all on one shaft they work together.
TutorialOnCoalPower__part3 Generators do not produce electricity when there is no need and ignore the energy from the mechanical shaft. However, the turbines do not stop when the shaft is spinning at full power, instead, they let the steam pass through which means some energy gets lost. To combat this, you can use a {0} attached to the mechanical shaft which will store the mechanical energy as inertia and return it when the power is needed, behaving like batteries.
TutorialOnCoalPower__part4 A {0} can be used in combination with “auto-balance” toggle on turbines. Once enabled, turbines will automatically turn off when the connected shaft has maximum inertia, and back on when the inertia is low. The {0} helps to increase the total inertia of the shaft to make this system more efficient and prevent loss of power due to turbines' slow startup.
TutorialOnContracts__name Contracts
TutorialOnContracts__part1 You can establish contracts with settlements to <b>exchange goods on regular basis</b>. Contracts are typically much more lucrative than quick trading deals but they cost Unity and require a dedicated {0}.
TutorialOnContracts__part2 After you establish a contract, you’ll need a {0} and a {1} with modules fit for the contract. For example, if you’re trading {2} for {3} you’ll need to have both a Unit Module ({2}) and a Fluid Module ({3}) attached to the {1} (1). Select either module, click 'assign a contract' (2), and assign the contract you wish to begin (3). Note that any other attached module will be auto assigned to the appropriate type of material if compatible with the contract.
TutorialOnContracts__part3 Once your {1} modules are supplied with the correct amounts of required goods, the {0} will automatically travel to the settlement to exchange the goods. Contracts enable you to trade as much as you want without any time restriction
TutorialOnCopySettings__part1 This tool enables you to copy configuration from one building to another. You can even drag over multiple buildings to mass apply the selected configuration.
TutorialOnCopySettings__part2 This tool can be activated by pressing {0} or by clicking the icon in the toolbar (1). Then click on the building you want to copy settings from (2). Finally click on or drag across as many other similar buildings to paste those settings (3).
TutorialOnCopyTool__part1 This tool allows you to select one or more buildings to copy and place elsewhere. This allows you to effortlessly copy existing factory designs to scale your production.
TutorialOnCopyTool__part2 To copy several buildings at once, press {0} or click the icon in the toolbar (1) to select the <b>copy tool</b> then click and drag across the desired buildings (2) tool. Let go of the mouse button and drag to where you want to place your copied buildings and left click once to place (3). You can <b>copy a single building</b> by hovering over it and pressing {1}.
TutorialOnCopyTool__part3 This tool copies configurations of buildings by default. You can hold the {0} while placing a building to prevent it from copying the configuration. Copies buildings will be constructed as new ones.
TutorialOnCrisis__name Crisis management
TutorialOnCrisis__part1 From time to time, your island might get into a crisis – fuel running out, no power, low maintenance, etc. Obviously, it is never your fault. It’s always caused by the people on the island doing a bad job. However, there are ways to avoid some of the issues early on.
TutorialOnCrisis__part2 You can pin / unpin products you would like to monitor in your right side panel. By clicking on this panel it will open your global statistics which showcases inventory across your island. Click on the pin icon to keep this product shown at all times.
TutorialOnCrisis__part2Heading Pinning important products
TutorialOnCrisis__part3 It is recommended to set up storage alerts for products like {0} or products that are critical for maintenance or settlement services. Getting notified early on gives you time to react. You can also set up dedicated storages, fill them with emergency supplies and disable truck export. This way, you have emergency supplies whenever you need them.
TutorialOnCrisis__part3Heading Storage alerts
TutorialOnCrisis__part4 Most of your machines and buildings are assigned a priority. The lower the number the higher the priority is and the more likely they get power, unity, workers, maintenance and more. So having the most critical infrastructure on an increased priority is a great way to go.
TutorialOnCrisis__part4Heading Priority system
TutorialOnCrisis__part5 Running out of power is no fun and there are several ways to avoid that. The first step is to set up alerts for storages that feed power-making machines, for example, coal and water storage that feed boilers used to produce steam for generators. This way, you know that coal or water are getting low before the power supply halts entirely.
TutorialOnCrisis__part5Heading Power crisis management
TutorialOnCrisis__part6V2 You can also give an increased priority to a storage that feeds your power plant. You must first have the <b>{0} slider</b> (1) moved away from the default location or you will not see the <b>priority selection screen</b> (2).
TutorialOnCrisis__part7a The most robust but expensive setup is to have a backup plant like in the real world. This can, for instance, be an array of diesel generators that are ready to kick in when power drops.
TutorialOnCrisis__part7b This works by default because a {0} has lower production priority than standard generators connected to turbines. You can reconfigure power generation priority for any power generator yourself. Note that machines consume less maintenance when they are idle.
TutorialOnCrisis__part8V2 In case of the worst emergency, you can also boost a machine. Boost enables machines to work without power at the monthly cost of {0}.
TutorialOnCutTool__part1 This tool is similar to the copy tool, but it removes the copied buildings. It only works for ghost buildings whose construction has not started yet.
TutorialOnCutTool__part2 The tool can be activated by pressing {0} or by clicking the icon in the toolbar (1). You can also press {1} while hovering your cursor over a building to cut it instantly, which can be handy when making quick adjustments.
TutorialOnDiesel__name Diesel production Diesel production
TutorialOnDiesel2__part1 {0} can be produced by distilling {1} in the {2}. To extract {1}, build an {3} on top of an oil reservoir. When an {3} is selected for building, you will see black bars revealing locations of the oil reservoir.
Context English Portuguese
TutorialOnCoalPower__part1 A more efficient way of generating power compared to diesel generators is a coal power plant. Coal burned in boilers turns water into steam (1). This steam then spins turbines (2) and transfers mechanical force over a shaft into attached power generators (3) which make electricity from it.
TutorialOnCoalPower__part2 It does not matter how you order your turbines and generators, as long as they are all on one shaft they work together.
TutorialOnCoalPower__part3 Generators do not produce electricity when there is no need and ignore the energy from the mechanical shaft. However, the turbines do not stop when the shaft is spinning at full power, instead, they let the steam pass through which means some energy gets lost. To combat this, you can use a {0} attached to the mechanical shaft which will store the mechanical energy as inertia and return it when the power is needed, behaving like batteries.
TutorialOnCoalPower__part4 A {0} can be used in combination with “auto-balance” toggle on turbines. Once enabled, turbines will automatically turn off when the connected shaft has maximum inertia, and back on when the inertia is low. The {0} helps to increase the total inertia of the shaft to make this system more efficient and prevent loss of power due to turbines' slow startup.
TutorialOnContracts__name Contracts
TutorialOnContracts__part1 You can establish contracts with settlements to <b>exchange goods on regular basis</b>. Contracts are typically much more lucrative than quick trading deals but they cost Unity and require a dedicated {0}.
TutorialOnContracts__part2 After you establish a contract, you’ll need a {0} and a {1} with modules fit for the contract. For example, if you’re trading {2} for {3} you’ll need to have both a Unit Module ({2}) and a Fluid Module ({3}) attached to the {1} (1). Select either module, click 'assign a contract' (2), and assign the contract you wish to begin (3). Note that any other attached module will be auto assigned to the appropriate type of material if compatible with the contract.
TutorialOnContracts__part3 Once your {1} modules are supplied with the correct amounts of required goods, the {0} will automatically travel to the settlement to exchange the goods. Contracts enable you to trade as much as you want without any time restriction
TutorialOnCopySettings__part1 This tool enables you to copy configuration from one building to another. You can even drag over multiple buildings to mass apply the selected configuration.
TutorialOnCopySettings__part2 This tool can be activated by pressing {0} or by clicking the icon in the toolbar (1). Then click on the building you want to copy settings from (2). Finally click on or drag across as many other similar buildings to paste those settings (3).
TutorialOnCopyTool__part1 This tool allows you to select one or more buildings to copy and place elsewhere. This allows you to effortlessly copy existing factory designs to scale your production.
TutorialOnCopyTool__part2 To copy several buildings at once, press {0} or click the icon in the toolbar (1) to select the <b>copy tool</b> then click and drag across the desired buildings (2) tool. Let go of the mouse button and drag to where you want to place your copied buildings and left click once to place (3). You can <b>copy a single building</b> by hovering over it and pressing {1}.
TutorialOnCopyTool__part3 This tool copies configurations of buildings by default. You can hold the {0} while placing a building to prevent it from copying the configuration. Copies buildings will be constructed as new ones.
TutorialOnCrisis__name Crisis management
TutorialOnCrisis__part1 From time to time, your island might get into a crisis – fuel running out, no power, low maintenance, etc. Obviously, it is never your fault. It’s always caused by the people on the island doing a bad job. However, there are ways to avoid some of the issues early on.
TutorialOnCrisis__part2 You can pin / unpin products you would like to monitor in your right side panel. By clicking on this panel it will open your global statistics which showcases inventory across your island. Click on the pin icon to keep this product shown at all times.
TutorialOnCrisis__part2Heading Pinning important products
TutorialOnCrisis__part3 It is recommended to set up storage alerts for products like {0} or products that are critical for maintenance or settlement services. Getting notified early on gives you time to react. You can also set up dedicated storages, fill them with emergency supplies and disable truck export. This way, you have emergency supplies whenever you need them.
TutorialOnCrisis__part3Heading Storage alerts
TutorialOnCrisis__part4 Most of your machines and buildings are assigned a priority. The lower the number the higher the priority is and the more likely they get power, unity, workers, maintenance and more. So having the most critical infrastructure on an increased priority is a great way to go.
TutorialOnCrisis__part4Heading Priority system
TutorialOnCrisis__part5 Running out of power is no fun and there are several ways to avoid that. The first step is to set up alerts for storages that feed power-making machines, for example, coal and water storage that feed boilers used to produce steam for generators. This way, you know that coal or water are getting low before the power supply halts entirely.
TutorialOnCrisis__part5Heading Power crisis management
TutorialOnCrisis__part6V2 You can also give an increased priority to a storage that feeds your power plant. You must first have the <b>{0} slider</b> (1) moved away from the default location or you will not see the <b>priority selection screen</b> (2).
TutorialOnCrisis__part7a The most robust but expensive setup is to have a backup plant like in the real world. This can, for instance, be an array of diesel generators that are ready to kick in when power drops.
TutorialOnCrisis__part7b This works by default because a {0} has lower production priority than standard generators connected to turbines. You can reconfigure power generation priority for any power generator yourself. Note that machines consume less maintenance when they are idle.
TutorialOnCrisis__part8V2 In case of the worst emergency, you can also boost a machine. Boost enables machines to work without power at the monthly cost of {0}.
TutorialOnCutTool__part1 This tool is similar to the copy tool, but it removes the copied buildings. It only works for ghost buildings whose construction has not started yet.
TutorialOnCutTool__part2 The tool can be activated by pressing {0} or by clicking the icon in the toolbar (1). You can also press {1} while hovering your cursor over a building to cut it instantly, which can be handy when making quick adjustments.
TutorialOnDiesel2__part1 {0} can be produced by distilling {1} in the {2}. To extract {1}, build an {3} on top of an oil reservoir. When an {3} is selected for building, you will see black bars revealing locations of the oil reservoir.
Context English Portuguese
TutorialOnCrisis__name Crisis management
TutorialOnCrisis__part1 From time to time, your island might get into a crisis – fuel running out, no power, low maintenance, etc. Obviously, it is never your fault. It’s always caused by the people on the island doing a bad job. However, there are ways to avoid some of the issues early on.
TutorialOnCrisis__part2 You can pin / unpin products you would like to monitor in your right side panel. By clicking on this panel it will open your global statistics which showcases inventory across your island. Click on the pin icon to keep this product shown at all times.
TutorialOnCrisis__part2Heading Pinning important products
TutorialOnCrisis__part3 It is recommended to set up storage alerts for products like {0} or products that are critical for maintenance or settlement services. Getting notified early on gives you time to react. You can also set up dedicated storages, fill them with emergency supplies and disable truck export. This way, you have emergency supplies whenever you need them.
TutorialOnCrisis__part3Heading Storage alerts
TutorialOnCrisis__part4 Most of your machines and buildings are assigned a priority. The lower the number the higher the priority is and the more likely they get power, unity, workers, maintenance and more. So having the most critical infrastructure on an increased priority is a great way to go.
TutorialOnCrisis__part4Heading Priority system
TutorialOnCrisis__part5 Running out of power is no fun and there are several ways to avoid that. The first step is to set up alerts for storages that feed power-making machines, for example, coal and water storage that feed boilers used to produce steam for generators. This way, you know that coal or water are getting low before the power supply halts entirely.
TutorialOnCrisis__part5Heading Power crisis management
TutorialOnCrisis__part6V2 You can also give an increased priority to a storage that feeds your power plant. You must first have the <b>{0} slider</b> (1) moved away from the default location or you will not see the <b>priority selection screen</b> (2).
TutorialOnCrisis__part7a The most robust but expensive setup is to have a backup plant like in the real world. This can, for instance, be an array of diesel generators that are ready to kick in when power drops.
TutorialOnCrisis__part7b This works by default because a {0} has lower production priority than standard generators connected to turbines. You can reconfigure power generation priority for any power generator yourself. Note that machines consume less maintenance when they are idle.
TutorialOnCrisis__part8V2 In case of the worst emergency, you can also boost a machine. Boost enables machines to work without power at the monthly cost of {0}.

Loading…

No matching activity found.

Browse all component changes

Things to check

Variants

There are 14 variants of this string.

View

Glossary

English Portuguese
Click Clique Glossary

String information

Context
TutorialOnCrisis__part2
Source string comment
String age
2 years ago
Source string age
2 years ago
Translation file
pt.po, string 2632