Source string Source string

Context English
TutorialOnHealth__part5b There are also diseases that can occur due to bad conditions in your settlement, for instance lack of clean water or too much trash. There are no diseases from pollution as pollution gives a health penalty directly.
TutorialOnHealth__part5Heading Diseases
TutorialOnIronOre__part1 The {0} can process both {1} and {2} by toggling both recipes on. To do so, turn on the <b>{1}</b> recipe by clicking on it.
TutorialOnIronOre__part2 The priority of recipe execution depends on their order which can be changed using the arrows on the left (1). If you want to prioritize {0} processing over {1}, click the <b>up arrow</b> on the <b>{0} recipe</b> for it to move above the <b>{1} recipe</b>.
TutorialOnIronOre__part3 With {0} being smelted, the {2} will produce <b>{1}</b>. {1} can be dumped anywhere on the island by placing dumping designations (unless you prevent {1} dumping by changing the <b>global dumping filter</b>). Trucks will always prioritize delivering {1} and other materials to where it is needed before dumping it (e.g. concrete production). Dumping {1} is important as typically your smelting industry will produce way more {1} than you can use. Dumping it has no pollution effect.
TutorialOnIronOreSmelting__name Iron ore smelting
TutorialOnMaintenance__name Maintenance
TutorialOnMaintenance__part1 Maintenance is a crucial global resource that is required by vehicles and buildings to keep operational otherwise they break down and stop working. Maintenance level of each entity can be seen on the bottom of its window (1). In an emergency, broken entities can be instantly repaired using {0} (2).
TutorialOnMaintenance__part2 In order to produce maintenance you need to build a {0} and supply it with the necessary materials.
TutorialOnMaintenance__part3 You can see the current Maintenance amount on the right side of the screen (1). You can also see Maintenance Production and Consumption over time in the Statistics screen (2).
TutorialOnMineTower__name Mining
TutorialOnMining__part1 You can remove any material from the terrain by mining it with your <b>excavators</b> and add material by dumping it with trucks.
TutorialOnMining__part10 Below is an example of how a mining designation starting at surface level is reachable only if it touches the surface. The top designation is reachable as denoted by the yellow color. The bottom starts one level below the surface and is not reachable, denoted by the orange color with red borders.
TutorialOnMining__part11 Use the {0} key to switch to the <b>ramp</b> mode. Then you can snap to a previous flat designations and extend a ramp from there.
TutorialOnMining__part11Header Creating Ramps
TutorialOnMining__part12 Each designation square can be mined by <b>only one excavator at a time</b>. Be sure that there are enough available designations if you have multiple excavators.
TutorialOnMining__part13 You can see available resources by toggling a resource overlay in the bottom-left corner of the screen.
TutorialOnMining__part13Header Resources layer
TutorialOnMining__part2 While dumping designations can be placed anywhere on the island, mining designations must be within a {0} managed area. With a mine control tower selected, click the {1} button to outline a new area.
TutorialOnMining__part3 Trucks and excavators must be <b>assigned to a {0}</b> in order for mining to begin. Excavators mine designated terrain while trucks transport the mined materials from the excavators to machines, storages, or any available dumping areas.
TutorialOnMining__part4 To mine the terrain, select the <b>mine designation tool</b> {0} from the bottom toolbar (1), and click and drag on the terrain to designate your mining area (2).
TutorialOnMining__part4Header Mining designations
TutorialOnMining__part5 Designations denote how the terrain will be shaped after mining.
TutorialOnMining__part6 This tool behaves the same as the <b>dumping designating tool</b>. {0} will toggle between <b>flat</b> or <b>ramp</b> designations. Pressing {1} will toggle the ramp direction either <b>up</b> or <b>down</b> when placing beside another designation.
TutorialOnMining__part7 Move the height up or down using {0} and {1} respectively.
TutorialOnMining__part8 Rotate the ramp direction using {0}.
TutorialOnMining__part9 Mining designations <b>have to start at or above the terrain</b>, otherwise, they won’t be reachable by your excavators. If an edge of designation is not reachable, a red line is displayed. If there are red lines all around a designated area, that means that it cannot be mined.
TutorialOnPathing__part1 If your vehicle has issues reaching its target because there is no valid path, you can investigate this situation by toggling its <b>navigation overlay</b>. Each type of vehicle has its own overlay. Trucks delivering construction materials have some distance tolerance but vehicles performing regular duties need to be able to navigate near their target.
TutorialOnPathing__part3 Sometimes, vehicles can get stuck. You can always recover a vehicle using the <b>recovery action</b>. To avoid situations like this, use wide ramps and retaining walls during mining to prevent terrain collapse.
TutorialOnPathing__part4 Sometimes, trucks can not access certain buildings due to obstacles such as terrain or other buildings. Instead of rebuilding parts of your factory to accommodate the vehicles, you can turn off import or export at the problematic building to prevent vehicles from trying to access it.
TutorialOnPauseTool__part1 This tool enables pausing and unpausing individual entities such as machines or vehicles. It also supports mass pausing / unpausing by dragging over an area.
Context English
TutorialOnHealth__part5b There are also diseases that can occur due to bad conditions in your settlement, for instance lack of clean water or too much trash. There are no diseases from pollution as pollution gives a health penalty directly.
TutorialOnHealth__part5Heading Diseases
TutorialOnIronOreSmelting__name Iron ore smelting
TutorialOnIronOre__part1 The {0} can process both {1} and {2} by toggling both recipes on. To do so, turn on the <b>{1}</b> recipe by clicking on it.
TutorialOnIronOre__part2 The priority of recipe execution depends on their order which can be changed using the arrows on the left (1). If you want to prioritize {0} processing over {1}, click the <b>up arrow</b> on the <b>{0} recipe</b> for it to move above the <b>{1} recipe</b>.
TutorialOnIronOre__part3 With {0} being smelted, the {2} will produce <b>{1}</b>. {1} can be dumped anywhere on the island by placing dumping designations (unless you prevent {1} dumping by changing the <b>global dumping filter</b>). Trucks will always prioritize delivering {1} and other materials to where it is needed before dumping it (e.g. concrete production). Dumping {1} is important as typically your smelting industry will produce way more {1} than you can use. Dumping it has no pollution effect.
TutorialOnMaintenance__name Maintenance
TutorialOnMaintenance__part1 Maintenance is a crucial global resource that is required by vehicles and buildings to keep operational otherwise they break down and stop working. Maintenance level of each entity can be seen on the bottom of its window (1). In an emergency, broken entities can be instantly repaired using {0} (2).
TutorialOnMaintenance__part2 In order to produce maintenance you need to build a {0} and supply it with the necessary materials.
TutorialOnMaintenance__part3 You can see the current Maintenance amount on the right side of the screen (1). You can also see Maintenance Production and Consumption over time in the Statistics screen (2).
TutorialOnMineTower__name Mining
TutorialOnMining__part1 You can remove any material from the terrain by mining it with your <b>excavators</b> and add material by dumping it with trucks.
TutorialOnMining__part10 Below is an example of how a mining designation starting at surface level is reachable only if it touches the surface. The top designation is reachable as denoted by the yellow color. The bottom starts one level below the surface and is not reachable, denoted by the orange color with red borders.
TutorialOnMining__part11 Use the {0} key to switch to the <b>ramp</b> mode. Then you can snap to a previous flat designations and extend a ramp from there.
TutorialOnMining__part11Header Creating Ramps
TutorialOnMining__part12 Each designation square can be mined by <b>only one excavator at a time</b>. Be sure that there are enough available designations if you have multiple excavators.
TutorialOnMining__part13 You can see available resources by toggling a resource overlay in the bottom-left corner of the screen.
TutorialOnMining__part13Header Resources layer
TutorialOnMining__part2 While dumping designations can be placed anywhere on the island, mining designations must be within a {0} managed area. With a mine control tower selected, click the {1} button to outline a new area.
TutorialOnMining__part3 Trucks and excavators must be <b>assigned to a {0}</b> in order for mining to begin. Excavators mine designated terrain while trucks transport the mined materials from the excavators to machines, storages, or any available dumping areas.
TutorialOnMining__part4 To mine the terrain, select the <b>mine designation tool</b> {0} from the bottom toolbar (1), and click and drag on the terrain to designate your mining area (2).
TutorialOnMining__part4Header Mining designations
TutorialOnMining__part5 Designations denote how the terrain will be shaped after mining.
TutorialOnMining__part6 This tool behaves the same as the <b>dumping designating tool</b>. {0} will toggle between <b>flat</b> or <b>ramp</b> designations. Pressing {1} will toggle the ramp direction either <b>up</b> or <b>down</b> when placing beside another designation.
TutorialOnMining__part7 Move the height up or down using {0} and {1} respectively.
TutorialOnMining__part8 Rotate the ramp direction using {0}.
TutorialOnMining__part9 Mining designations <b>have to start at or above the terrain</b>, otherwise, they won’t be reachable by your excavators. If an edge of designation is not reachable, a red line is displayed. If there are red lines all around a designated area, that means that it cannot be mined.
TutorialOnPathing__part1 If your vehicle has issues reaching its target because there is no valid path, you can investigate this situation by toggling its <b>navigation overlay</b>. Each type of vehicle has its own overlay. Trucks delivering construction materials have some distance tolerance but vehicles performing regular duties need to be able to navigate near their target.
TutorialOnPathing__part3 Sometimes, vehicles can get stuck. You can always recover a vehicle using the <b>recovery action</b>. To avoid situations like this, use wide ramps and retaining walls during mining to prevent terrain collapse.
TutorialOnPathing__part4 Sometimes, trucks can not access certain buildings due to obstacles such as terrain or other buildings. Instead of rebuilding parts of your factory to accommodate the vehicles, you can turn off import or export at the problematic building to prevent vehicles from trying to access it.
Context English
TutorialOnMining__part1 You can remove any material from the terrain by mining it with your <b>excavators</b> and add material by dumping it with trucks.
TutorialOnMining__part10 Below is an example of how a mining designation starting at surface level is reachable only if it touches the surface. The top designation is reachable as denoted by the yellow color. The bottom starts one level below the surface and is not reachable, denoted by the orange color with red borders.
TutorialOnMining__part11 Use the {0} key to switch to the <b>ramp</b> mode. Then you can snap to a previous flat designations and extend a ramp from there.
TutorialOnMining__part11Header Creating Ramps
TutorialOnMining__part12 Each designation square can be mined by <b>only one excavator at a time</b>. Be sure that there are enough available designations if you have multiple excavators.
TutorialOnMining__part13 You can see available resources by toggling a resource overlay in the bottom-left corner of the screen.
TutorialOnMining__part13Header Resources layer
TutorialOnMining__part2 While dumping designations can be placed anywhere on the island, mining designations must be within a {0} managed area. With a mine control tower selected, click the {1} button to outline a new area.
TutorialOnMining__part3 Trucks and excavators must be <b>assigned to a {0}</b> in order for mining to begin. Excavators mine designated terrain while trucks transport the mined materials from the excavators to machines, storages, or any available dumping areas.
TutorialOnMining__part4 To mine the terrain, select the <b>mine designation tool</b> {0} from the bottom toolbar (1), and click and drag on the terrain to designate your mining area (2).
TutorialOnMining__part4Header Mining designations
TutorialOnMining__part5 Designations denote how the terrain will be shaped after mining.
TutorialOnMining__part6 This tool behaves the same as the <b>dumping designating tool</b>. {0} will toggle between <b>flat</b> or <b>ramp</b> designations. Pressing {1} will toggle the ramp direction either <b>up</b> or <b>down</b> when placing beside another designation.
TutorialOnMining__part7 Move the height up or down using {0} and {1} respectively.
TutorialOnMining__part8 Rotate the ramp direction using {0}.
TutorialOnMining__part9 Mining designations <b>have to start at or above the terrain</b>, otherwise, they won’t be reachable by your excavators. If an edge of designation is not reachable, a red line is displayed. If there are red lines all around a designated area, that means that it cannot be mined.

Loading…

No matching activity found.

Browse all component changes

Things to check

Variants

There are 16 variants of this string.

View

Glossary

English English
No related strings found in the glossary.

String information

Context
TutorialOnMining__part12
Source string comment
Flags
read-only
String age
a year ago
Source string age
a year ago
Translation file
en.po, string 2694