Captain of Industry

Game

Thai

Translate

	Context	English	Thai
	TutorialOnMaintenance__part1	Maintenance is a crucial global resource that is required by vehicles and buildings to keep operational otherwise they break down and stop working. Maintenance level of each entity can be seen on the bottom of its window (1). In an emergency, broken entities can be instantly repaired using {0} (2).
	TutorialOnMaintenance__part2	In order to produce maintenance you need to build a {0} and supply it with the necessary materials.
	TutorialOnMaintenance__part3	You can see the current Maintenance amount on the right side of the screen (1). You can also see Maintenance Production and Consumption over time in the Statistics screen (2).
	TutorialOnMineTower__name	Mining
	TutorialOnMining__part1	You can remove any material from the terrain by mining it with your <b>excavators</b> and add material by dumping it with trucks.
	TutorialOnMining__part10	Below is an example of how a mining designation starting at surface level is reachable only if it touches the surface. The top designation is reachable as denoted by the yellow color. The bottom starts one level below the surface and is not reachable, denoted by the orange color with red borders.
	TutorialOnMining__part11	Use the {0} key to switch to the <b>ramp</b> mode. Then you can snap to a previous flat designations and extend a ramp from there.
	TutorialOnMining__part11Header	Creating Ramps
	TutorialOnMining__part12	Each designation square can be mined by <b>only one excavator at a time</b>. Be sure that there are enough available designations if you have multiple excavators.
	TutorialOnMining__part13	You can see available resources by toggling a resource overlay in the bottom-left corner of the screen.
	TutorialOnMining__part13Header	Resources layer
	TutorialOnMining__part2	While dumping designations can be placed anywhere on the island, mining designations must be within a {0} managed area. With a mine control tower selected, click the {1} button to outline a new area.
	TutorialOnMining__part3	Trucks and excavators must be <b>assigned to a {0}</b> in order for mining to begin. Excavators mine designated terrain while trucks transport the mined materials from the excavators to machines, storages, or any available dumping areas.
	TutorialOnMining__part4	To mine the terrain, select the <b>mine designation tool</b> {0} from the bottom toolbar (1), and click and drag on the terrain to designate your mining area (2).
	TutorialOnMining__part4Header	Mining designations
	TutorialOnMining__part5	Designations denote how the terrain will be shaped after mining.
	TutorialOnMining__part6	This tool behaves the same as the <b>dumping designating tool</b>. {0} will toggle between <b>flat</b> or <b>ramp</b> designations. Pressing {1} will toggle the ramp direction either <b>up</b> or <b>down</b> when placing beside another designation.
	TutorialOnMining__part7	Move the height up or down using {0} and {1} respectively.
	TutorialOnMining__part8	Rotate the ramp direction using {0}.
	TutorialOnMining__part9	Mining designations <b>have to start at or above the terrain</b>, otherwise, they won’t be reachable by your excavators. If an edge of designation is not reachable, a red line is displayed. If there are red lines all around a designated area, that means that it cannot be mined.
	TutorialOnPathing__part1	If your vehicle has issues reaching its target because there is no valid path, you can investigate this situation by toggling its <b>navigation overlay</b>. Each type of vehicle has its own overlay. Trucks delivering construction materials have some distance tolerance but vehicles performing regular duties need to be able to navigate near their target.
	TutorialOnPathing__part3	Sometimes, vehicles can get stuck. You can always recover a vehicle using the <b>recovery action</b>. To avoid situations like this, use wide ramps and retaining walls during mining to prevent terrain collapse.
	TutorialOnPathing__part4	Sometimes, trucks can not access certain buildings due to obstacles such as terrain or other buildings. Instead of rebuilding parts of your factory to accommodate the vehicles, you can turn off import or export at the problematic building to prevent vehicles from trying to access it.
	TutorialOnPauseTool__part1	This tool enables pausing and unpausing individual entities such as machines or vehicles. It also supports mass pausing / unpausing by dragging over an area.
	TutorialOnPauseTool__part2	The tool can be activated by pressing {0} or by clicking the icon in the toolbar (1). When you drag over an area with non-constructed buildings it will toggle the construction pause, otherwise, it will toggle the regular pause. If any entity in the selection is paused, it unpauses everything selected, otherwise, it pauses everything selected.
	TutorialOnPlanning__part1	The Planning Mode is toggleable mode that makes any building placed to be initially paused. You can toggle Planning Mode on and off by clicking the Planning Mode button in the bottom left corner toolbar. Buildings with paused construction are colored <b>Gray</b> as shown below.
	TutorialOnPlanning__part3V2	Turning off Planning Mode does not unpause buildings that were placed while it was on. To unpause buildings placed, use the {0} (1). You can also select a building that was placed in {1} and unpause it by clicking the pause button on the Construction Inspector window (2).
	TutorialOnPlanning__part5Heading	Color Statuses of Construction
	TutorialOnPlanning__part6	When placing buildings, the color of the building ghost itself will change depending on its <b>construction status</b>.
	TutorialOnPlanning__part7	Buildings colored <b>White</b> are planned for construction and are currently paused. <b>Blue</b> colored buildings are currently being constructed. <b>Red</b> colored buildings are currently being deconstructed.
	TutorialOnPopsAndUnity__name	Population and Unity

	Context	English	Thai
	TutorialOnMaintenance__part1	Maintenance is a crucial global resource that is required by vehicles and buildings to keep operational otherwise they break down and stop working. Maintenance level of each entity can be seen on the bottom of its window (1). In an emergency, broken entities can be instantly repaired using {0} (2).
	TutorialOnMaintenance__part2	In order to produce maintenance you need to build a {0} and supply it with the necessary materials.
	TutorialOnMaintenance__part3	You can see the current Maintenance amount on the right side of the screen (1). You can also see Maintenance Production and Consumption over time in the Statistics screen (2).
	TutorialOnMineTower__name	Mining
	TutorialOnMining__part1	You can remove any material from the terrain by mining it with your <b>excavators</b> and add material by dumping it with trucks.
	TutorialOnMining__part10	Below is an example of how a mining designation starting at surface level is reachable only if it touches the surface. The top designation is reachable as denoted by the yellow color. The bottom starts one level below the surface and is not reachable, denoted by the orange color with red borders.
	TutorialOnMining__part11	Use the {0} key to switch to the <b>ramp</b> mode. Then you can snap to a previous flat designations and extend a ramp from there.
	TutorialOnMining__part11Header	Creating Ramps
	TutorialOnMining__part12	Each designation square can be mined by <b>only one excavator at a time</b>. Be sure that there are enough available designations if you have multiple excavators.
	TutorialOnMining__part13	You can see available resources by toggling a resource overlay in the bottom-left corner of the screen.
	TutorialOnMining__part13Header	Resources layer
	TutorialOnMining__part2	While dumping designations can be placed anywhere on the island, mining designations must be within a {0} managed area. With a mine control tower selected, click the {1} button to outline a new area.
	TutorialOnMining__part3	Trucks and excavators must be <b>assigned to a {0}</b> in order for mining to begin. Excavators mine designated terrain while trucks transport the mined materials from the excavators to machines, storages, or any available dumping areas.
	TutorialOnMining__part4	To mine the terrain, select the <b>mine designation tool</b> {0} from the bottom toolbar (1), and click and drag on the terrain to designate your mining area (2).
	TutorialOnMining__part4Header	Mining designations
	TutorialOnMining__part5	Designations denote how the terrain will be shaped after mining.
	TutorialOnMining__part6	This tool behaves the same as the <b>dumping designating tool</b>. {0} will toggle between <b>flat</b> or <b>ramp</b> designations. Pressing {1} will toggle the ramp direction either <b>up</b> or <b>down</b> when placing beside another designation.
	TutorialOnMining__part7	Move the height up or down using {0} and {1} respectively.
	TutorialOnMining__part8	Rotate the ramp direction using {0}.
	TutorialOnMining__part9	Mining designations <b>have to start at or above the terrain</b>, otherwise, they won’t be reachable by your excavators. If an edge of designation is not reachable, a red line is displayed. If there are red lines all around a designated area, that means that it cannot be mined.
	TutorialOnPathing__part1	If your vehicle has issues reaching its target because there is no valid path, you can investigate this situation by toggling its <b>navigation overlay</b>. Each type of vehicle has its own overlay. Trucks delivering construction materials have some distance tolerance but vehicles performing regular duties need to be able to navigate near their target.
	TutorialOnPathing__part3	Sometimes, vehicles can get stuck. You can always recover a vehicle using the <b>recovery action</b>. To avoid situations like this, use wide ramps and retaining walls during mining to prevent terrain collapse.
	TutorialOnPathing__part4	Sometimes, trucks can not access certain buildings due to obstacles such as terrain or other buildings. Instead of rebuilding parts of your factory to accommodate the vehicles, you can turn off import or export at the problematic building to prevent vehicles from trying to access it.
	TutorialOnPauseTool__part1	This tool enables pausing and unpausing individual entities such as machines or vehicles. It also supports mass pausing / unpausing by dragging over an area.
	TutorialOnPauseTool__part2	The tool can be activated by pressing {0} or by clicking the icon in the toolbar (1). When you drag over an area with non-constructed buildings it will toggle the construction pause, otherwise, it will toggle the regular pause. If any entity in the selection is paused, it unpauses everything selected, otherwise, it pauses everything selected.
	TutorialOnPlanning__part1	The Planning Mode is toggleable mode that makes any building placed to be initially paused. You can toggle Planning Mode on and off by clicking the Planning Mode button in the bottom left corner toolbar. Buildings with paused construction are colored <b>Gray</b> as shown below.
	TutorialOnPlanning__part3V2	Turning off Planning Mode does not unpause buildings that were placed while it was on. To unpause buildings placed, use the {0} (1). You can also select a building that was placed in {1} and unpause it by clicking the pause button on the Construction Inspector window (2).
	TutorialOnPlanning__part5Heading	Color Statuses of Construction
	TutorialOnPlanning__part6	When placing buildings, the color of the building ghost itself will change depending on its <b>construction status</b>.
	TutorialOnPlanning__part7	Buildings colored <b>White</b> are planned for construction and are currently paused. <b>Blue</b> colored buildings are currently being constructed. <b>Red</b> colored buildings are currently being deconstructed.

	Context	English	Thai
	TutorialOnMining__part1	You can remove any material from the terrain by mining it with your <b>excavators</b> and add material by dumping it with trucks.
	TutorialOnMining__part10	Below is an example of how a mining designation starting at surface level is reachable only if it touches the surface. The top designation is reachable as denoted by the yellow color. The bottom starts one level below the surface and is not reachable, denoted by the orange color with red borders.
	TutorialOnMining__part11	Use the {0} key to switch to the <b>ramp</b> mode. Then you can snap to a previous flat designations and extend a ramp from there.
	TutorialOnMining__part11Header	Creating Ramps
	TutorialOnMining__part12	Each designation square can be mined by <b>only one excavator at a time</b>. Be sure that there are enough available designations if you have multiple excavators.
	TutorialOnMining__part13	You can see available resources by toggling a resource overlay in the bottom-left corner of the screen.
	TutorialOnMining__part13Header	Resources layer
	TutorialOnMining__part2	While dumping designations can be placed anywhere on the island, mining designations must be within a {0} managed area. With a mine control tower selected, click the {1} button to outline a new area.
	TutorialOnMining__part3	Trucks and excavators must be <b>assigned to a {0}</b> in order for mining to begin. Excavators mine designated terrain while trucks transport the mined materials from the excavators to machines, storages, or any available dumping areas.
	TutorialOnMining__part4	To mine the terrain, select the <b>mine designation tool</b> {0} from the bottom toolbar (1), and click and drag on the terrain to designate your mining area (2).
	TutorialOnMining__part4Header	Mining designations
	TutorialOnMining__part5	Designations denote how the terrain will be shaped after mining.
	TutorialOnMining__part6	This tool behaves the same as the <b>dumping designating tool</b>. {0} will toggle between <b>flat</b> or <b>ramp</b> designations. Pressing {1} will toggle the ramp direction either <b>up</b> or <b>down</b> when placing beside another designation.
	TutorialOnMining__part7	Move the height up or down using {0} and {1} respectively.
	TutorialOnMining__part8	Rotate the ramp direction using {0}.
	TutorialOnMining__part9	Mining designations <b>have to start at or above the terrain</b>, otherwise, they won’t be reachable by your excavators. If an edge of designation is not reachable, a red line is displayed. If there are red lines all around a designated area, that means that it cannot be mined.

Loading…

No matching activity found.

Browse all component changes

Things to check

Variants

There are 16 variants of this string.

Glossary

English	Thai
Designations	เป้าหมายปลายทาง	Glossary
designations	เป้าหมายปลายทาง	Glossary
用於地形、採礦、傾倒、造林、伐木
mining	ขุดเหมือง	Glossary
Mining	การทำเหมือง	Glossary
terrain	พื้นที่	Glossary
the terrain	พื้นดิน	Glossary
will	จะ	Glossary

String information

Context

TutorialOnMining__part5

Source string comment

String age

a year ago

Source string age

a year ago

Translation file

th.po, string 2701