Captain of Industry/Game — Danish @ Captain of Industry: Nuclear reactor cannot start if it is not well maintained. …

Translation

Context NuclearReactor__NotEnoughMaintenance

English explanation of nuclear reactor state when it has low maintenance explanation of nuclear reactor state when it has low maintenance

Danish

Needs editing

Context	English	Danish
NoWaterDisease__name	Cholera
NoWaterDisease_Reason	low water supply
NuclearReactor__AutoThrottle	Enable automatic regulation
NuclearReactor__AutoThrottle_Tooltip	If enabled, the reactor will regulate the target power based on the heat demand. The automated regulation will never go above the target power level (selected on the slider above). It also can't go below the first level (shutting the reactor down). The automation relies on the cooling loop; without it a rapid change in reactor's heat could lead to a meltdown. This regulation requires computing in order to operate.
NuclearReactor__desc	Thermal reactor that maintains nuclear chain reaction from enriched uranium rods. The reaction releases a large amount of energy utilized for steam generation. This plant can be set up to effectively provide up to {0} MW of electricity when running on full power. Beware that spent fuel is radioactive and can harm the population if not stored in a specialized facility.
NuclearReactor__DisableBeforeUpgrade	The reactor needs to be turned off before upgrading
NuclearReactor__EmergencyCoolingTitle	Cooling	Emergency cooling
NuclearReactor__EmergencyCoolingTooltip	Cooling is deployed in case the reactor starts to overheat, and that typically happens when water is not supplied fast enough to be converted into steam (or steam output gets stuck). Cooling is not mandatory if you are not using automatic power regulation. However, it is highly recommended to have it as it provides extra protection and helps to avoid any potential overheating.	Emergency cooling is deployed in case the reactor starts to overheat, and that typically happens when water is not supplied fast enough to be converted into steam. Emergency cooling is not mandatory but is highly advised as it provides extra protection and helps to avoid any potential overheating.
NuclearReactor__EnrichmentTitle	Enrichment
NuclearReactor__EnrichmentTooltip	If input is provided, it will be enriched into fissile fuel. The enrichment process is optional and does not affect reactor's fuel economy. Keeping the enriched output buffer full does not affect operation of the reactor.
NuclearReactor__HeatLevelNoRadiationSuffix	This reactor has advanced safety feature that prevents radiation leaks on overheat but its fuel content will be lost.
NuclearReactor__HeatLevelRadiationSuffix	Overheat will also cause significant radiation leak into the area.
NuclearReactor__HeatLevelTitle	Reactor heat	Reactor heat
NuclearReactor__HeatLevelTooltip	The current heat that has built up in the reactor. Heat is necessary to produce steam to run turbines. The pace of heat generation depends on the current power level of the reactor. When the heat reaches above the red marker, emergency cooling will try to reduce excess heat in the reactor. If the heat level goes beyond the heat bar maximum, the reactor will critically overheat, damaging the reactor and releasing radiation into the area.	The current heat that has built up in the reactor. Heat is necessary to produce steam to run turbines. The pace of heat generation depends on the current power level of the reactor. When the heat reaches above the red marker, emergency cooling will try to reduce excess heat in the reactor. If the heat level goes beyond the heat bar maximum, the reactor will critically overheat, damaging the reactor and releasing radiation into the area.
NuclearReactor__name	Nuclear reactor	Nuclear reactor
NuclearReactor__NotEnoughMaintenance	Nuclear reactor cannot start if it is not well maintained. Increase maintenance in order to safely start it.	WARNING: Nuclear reactor cannot start if it is not well maintained. Increase maintenance in order to safely start it.
NuclearReactor__Overheated	Nuclear reactor was critically overheated and is shutting down. Depending on severity, this may cause loss of loaded fuel, damage to the building (loss of maintenance), and leak of radiation.	WARNING: Nuclear reactor was critically overheated and is shutting down. Depending on severity, this may cause loss of loaded fuel, damage to the building (loss of maintenance), and leak of radioactivity.
NuclearReactor__PowerLevelTitle	Power level	Power level
NuclearReactor__PowerLevelTooltip	By dragging the orange slider to the right, you define the desired power level maintained in the reactor. This affects the amount of steam the reactor generates and how fast it burns through the fuel. All the heat generated needs to be used. Any extra heat can slowly build up, eventually leading to a reactor overheating. Basic reactors don’t have automated power regulation which makes their heat output fixed.	By dragging the orange slider to the right, you define the desired power level maintained in the reactor. This affects the amount of steam the reactor generates and how fast it burns through the fuel. All the heat generated needs to be used. Any extra heat can slowly build up, eventually leading to a reactor overheating. Basic reactors don’t have automated power regulation which makes their heat output fixed. Advanced reactors can utilize computing to regulate their power level in an automated fashion, reducing fuel and water consumption.
NuclearReactorInMeltdown__name	Nuclear reactor reached critical temperature and is shutting down!	Nuclear reactor reached critical temperature and is shutting down!
NuclearReactorRods__MinRequired	Requires at least {0} unit of fuel to operate
NuclearReactorRods__StatusTitle	Fuel in reactor
NuclearReactorRods__Tooltip	The reactor will operate as long as it is supplied the minimum amount of fuel shown below. When fuel is depleted it will be replaced with a new one and spent fuel or any other corresponding product will be returned.
NuclearReactorT2__desc	Advanced thermal reactor that provides increased throughput. This reactor is also able to utilize MOX fuel. It can also regulate its power level automatically (if computing is provided). This plant can be set up to effectively provide up to {0} MW of electricity when running on full power.
NuclearReactorT2__name	Nuclear reactor II
NuclearReprocessingPlant__desc	A complex facility which reprocesses radioactive material by isolating fission products (material that is no longer fissile and would slow down reaction if left in a reactor). Isolated waste decays faster, allowing it to be disposed of in a reasonable time span. The isolated waste is vitrified using molten glass into a solid form for easier storage.
NuclearReprocessingPlant__name	Nuclear reprocessing plant
NuclearWasteStorage__desc	A special underground storage facility that can safely manage any radioactive waste without causing any danger to the island’s population. Leaving a legacy for the next generations to come.	A special underground storage facility that can safely manage any radioactive waste without causing any danger to the island’s population. Leaving a legacy for the next generations to come.
NuclearWasteStorage__name	Radioactive waste storage	Spent fuel storage
NumberOfDays	{0} day
NumberOfMonths	{0} month	{0} month

Context	English	Danish
NuclearReactorT2__desc	Advanced thermal reactor that provides increased throughput. This reactor is also able to utilize MOX fuel. It can also regulate its power level automatically (if computing is provided). This plant can be set up to effectively provide up to {0} MW of electricity when running on full power.
NuclearReactorT2__name	Nuclear reactor II
NuclearReactor__AutoThrottle	Enable automatic regulation
NuclearReactor__AutoThrottle_Tooltip	If enabled, the reactor will regulate the target power based on the heat demand. The automated regulation will never go above the target power level (selected on the slider above). It also can't go below the first level (shutting the reactor down). The automation relies on the cooling loop; without it a rapid change in reactor's heat could lead to a meltdown. This regulation requires computing in order to operate.
NuclearReactor__desc	Thermal reactor that maintains nuclear chain reaction from enriched uranium rods. The reaction releases a large amount of energy utilized for steam generation. This plant can be set up to effectively provide up to {0} MW of electricity when running on full power. Beware that spent fuel is radioactive and can harm the population if not stored in a specialized facility.
NuclearReactor__DisableBeforeUpgrade	The reactor needs to be turned off before upgrading
NuclearReactor__EmergencyCoolingTitle	Cooling	Emergency cooling
NuclearReactor__EmergencyCoolingTooltip	Cooling is deployed in case the reactor starts to overheat, and that typically happens when water is not supplied fast enough to be converted into steam (or steam output gets stuck). Cooling is not mandatory if you are not using automatic power regulation. However, it is highly recommended to have it as it provides extra protection and helps to avoid any potential overheating.	Emergency cooling is deployed in case the reactor starts to overheat, and that typically happens when water is not supplied fast enough to be converted into steam. Emergency cooling is not mandatory but is highly advised as it provides extra protection and helps to avoid any potential overheating.
NuclearReactor__EnrichmentTitle	Enrichment
NuclearReactor__EnrichmentTooltip	If input is provided, it will be enriched into fissile fuel. The enrichment process is optional and does not affect reactor's fuel economy. Keeping the enriched output buffer full does not affect operation of the reactor.
NuclearReactor__HeatLevelNoRadiationSuffix	This reactor has advanced safety feature that prevents radiation leaks on overheat but its fuel content will be lost.
NuclearReactor__HeatLevelRadiationSuffix	Overheat will also cause significant radiation leak into the area.
NuclearReactor__HeatLevelTitle	Reactor heat	Reactor heat
NuclearReactor__HeatLevelTooltip	The current heat that has built up in the reactor. Heat is necessary to produce steam to run turbines. The pace of heat generation depends on the current power level of the reactor. When the heat reaches above the red marker, emergency cooling will try to reduce excess heat in the reactor. If the heat level goes beyond the heat bar maximum, the reactor will critically overheat, damaging the reactor and releasing radiation into the area.	The current heat that has built up in the reactor. Heat is necessary to produce steam to run turbines. The pace of heat generation depends on the current power level of the reactor. When the heat reaches above the red marker, emergency cooling will try to reduce excess heat in the reactor. If the heat level goes beyond the heat bar maximum, the reactor will critically overheat, damaging the reactor and releasing radiation into the area.
NuclearReactor__name	Nuclear reactor	Nuclear reactor
NuclearReactor__NotEnoughMaintenance	Nuclear reactor cannot start if it is not well maintained. Increase maintenance in order to safely start it.	WARNING: Nuclear reactor cannot start if it is not well maintained. Increase maintenance in order to safely start it.
NuclearReactor__Overheated	Nuclear reactor was critically overheated and is shutting down. Depending on severity, this may cause loss of loaded fuel, damage to the building (loss of maintenance), and leak of radiation.	WARNING: Nuclear reactor was critically overheated and is shutting down. Depending on severity, this may cause loss of loaded fuel, damage to the building (loss of maintenance), and leak of radioactivity.
NuclearReactor__PowerLevelTitle	Power level	Power level
NuclearReactor__PowerLevelTooltip	By dragging the orange slider to the right, you define the desired power level maintained in the reactor. This affects the amount of steam the reactor generates and how fast it burns through the fuel. All the heat generated needs to be used. Any extra heat can slowly build up, eventually leading to a reactor overheating. Basic reactors don’t have automated power regulation which makes their heat output fixed.	By dragging the orange slider to the right, you define the desired power level maintained in the reactor. This affects the amount of steam the reactor generates and how fast it burns through the fuel. All the heat generated needs to be used. Any extra heat can slowly build up, eventually leading to a reactor overheating. Basic reactors don’t have automated power regulation which makes their heat output fixed. Advanced reactors can utilize computing to regulate their power level in an automated fashion, reducing fuel and water consumption.
NuclearReprocessingPlant__desc	A complex facility which reprocesses radioactive material by isolating fission products (material that is no longer fissile and would slow down reaction if left in a reactor). Isolated waste decays faster, allowing it to be disposed of in a reasonable time span. The isolated waste is vitrified using molten glass into a solid form for easier storage.
NuclearReprocessingPlant__name	Nuclear reprocessing plant
NuclearWasteStorage__desc	A special underground storage facility that can safely manage any radioactive waste without causing any danger to the island’s population. Leaving a legacy for the next generations to come.	A special underground storage facility that can safely manage any radioactive waste without causing any danger to the island’s population. Leaving a legacy for the next generations to come.
NuclearWasteStorage__name	Radioactive waste storage	Spent fuel storage
NumberOfDays	{0} day
NumberOfMonths	{0} month	{0} month
NumberOfSettlements	{0} settlement	{0} settlement
NumberOfYears	{0} year
OakTreeDry__desc	Oak tree (dry)
OakTree__desc	Oak tree
Occupants__Title	Occupants	Occupants

Context	English	Danish
NuclearReactor__AutoThrottle	Enable automatic regulation
NuclearReactor__AutoThrottle_Tooltip	If enabled, the reactor will regulate the target power based on the heat demand. The automated regulation will never go above the target power level (selected on the slider above). It also can't go below the first level (shutting the reactor down). The automation relies on the cooling loop; without it a rapid change in reactor's heat could lead to a meltdown. This regulation requires computing in order to operate.
NuclearReactor__desc	Thermal reactor that maintains nuclear chain reaction from enriched uranium rods. The reaction releases a large amount of energy utilized for steam generation. This plant can be set up to effectively provide up to {0} MW of electricity when running on full power. Beware that spent fuel is radioactive and can harm the population if not stored in a specialized facility.
NuclearReactor__DisableBeforeUpgrade	The reactor needs to be turned off before upgrading
NuclearReactor__EmergencyCoolingTitle	Cooling	Emergency cooling
NuclearReactor__EmergencyCoolingTooltip	Cooling is deployed in case the reactor starts to overheat, and that typically happens when water is not supplied fast enough to be converted into steam (or steam output gets stuck). Cooling is not mandatory if you are not using automatic power regulation. However, it is highly recommended to have it as it provides extra protection and helps to avoid any potential overheating.	Emergency cooling is deployed in case the reactor starts to overheat, and that typically happens when water is not supplied fast enough to be converted into steam. Emergency cooling is not mandatory but is highly advised as it provides extra protection and helps to avoid any potential overheating.
NuclearReactor__EnrichmentTitle	Enrichment
NuclearReactor__EnrichmentTooltip	If input is provided, it will be enriched into fissile fuel. The enrichment process is optional and does not affect reactor's fuel economy. Keeping the enriched output buffer full does not affect operation of the reactor.
NuclearReactor__HeatLevelNoRadiationSuffix	This reactor has advanced safety feature that prevents radiation leaks on overheat but its fuel content will be lost.
NuclearReactor__HeatLevelRadiationSuffix	Overheat will also cause significant radiation leak into the area.
NuclearReactor__HeatLevelTitle	Reactor heat	Reactor heat
NuclearReactor__HeatLevelTooltip	The current heat that has built up in the reactor. Heat is necessary to produce steam to run turbines. The pace of heat generation depends on the current power level of the reactor. When the heat reaches above the red marker, emergency cooling will try to reduce excess heat in the reactor. If the heat level goes beyond the heat bar maximum, the reactor will critically overheat, damaging the reactor and releasing radiation into the area.	The current heat that has built up in the reactor. Heat is necessary to produce steam to run turbines. The pace of heat generation depends on the current power level of the reactor. When the heat reaches above the red marker, emergency cooling will try to reduce excess heat in the reactor. If the heat level goes beyond the heat bar maximum, the reactor will critically overheat, damaging the reactor and releasing radiation into the area.
NuclearReactor__name	Nuclear reactor	Nuclear reactor
NuclearReactor__NotEnoughMaintenance	Nuclear reactor cannot start if it is not well maintained. Increase maintenance in order to safely start it.	WARNING: Nuclear reactor cannot start if it is not well maintained. Increase maintenance in order to safely start it.
NuclearReactor__Overheated	Nuclear reactor was critically overheated and is shutting down. Depending on severity, this may cause loss of loaded fuel, damage to the building (loss of maintenance), and leak of radiation.	WARNING: Nuclear reactor was critically overheated and is shutting down. Depending on severity, this may cause loss of loaded fuel, damage to the building (loss of maintenance), and leak of radioactivity.
NuclearReactor__PowerLevelTitle	Power level	Power level
NuclearReactor__PowerLevelTooltip	By dragging the orange slider to the right, you define the desired power level maintained in the reactor. This affects the amount of steam the reactor generates and how fast it burns through the fuel. All the heat generated needs to be used. Any extra heat can slowly build up, eventually leading to a reactor overheating. Basic reactors don’t have automated power regulation which makes their heat output fixed.	By dragging the orange slider to the right, you define the desired power level maintained in the reactor. This affects the amount of steam the reactor generates and how fast it burns through the fuel. All the heat generated needs to be used. Any extra heat can slowly build up, eventually leading to a reactor overheating. Basic reactors don’t have automated power regulation which makes their heat output fixed. Advanced reactors can utilize computing to regulate their power level in an automated fashion, reducing fuel and water consumption.