Captain of Industry

Game

Romanian

Translate

	Context	English	Romanian
	TutorialOnSmelting__part1	The {0} allows smelting products such as ores and scrap into molten materials. The {1} can be used to cast molten materials to slabs.
	TutorialOnSmelting__part2	In order to produce <b>iron plate</b> you can use {0} gathered from the abandoned buildings nearby. Later on you will be able to set up a mining operation to smelt {1} directly.
	TutorialOnSmelting__part3	Build a {0} and 2x {1}. Connect them together using {2}. The molten channels are needed since the molten iron is too hot to be transported by trucks.
	TutorialOnSmelting__part4	Build and attach a {0} to the {1} either directly or via pipe (which can be found in the <b>transports</b> category).
	TutorialOnSmelting__part6	Since you don’t have access to coal mining yet, build a {0} to produce <b>coal</b> from wood. Don’t forget to attach a {1} to it as well. You can even share the same {1} which is used for {2}. To learn how to get <b>wood</b>, read the tutorial for {3}.
	TutorialOnSmelting__part7	Watch the furnace recipe in progress whilst trucks automatically supply it with {0} and coal. Iron slabs produced in a {1} will be stored there until trucks can find a place for them to be delivered. Later, you will be able to unlock and build conveyor belts to deliver iron directly to your production buildings or storage.
	TutorialOnStorage__part1	It is beneficial to use conveyor belts and pipes to transport goods from production buildings to storages and let trucks to balance the inventory between storages. This helps keep truck utilization high since they can always travel fully loaded. It also gives machines an extra input and output buffer for uninterrupted operation.
	TutorialOnStorage__part2	For example, {0} can benefit by having {1} and {2} storage silos attached via conveyor belts.
	TutorialOnStorage__part3	A storage unit will not actively request products from trucks by default. To change this, drag the green slider marked as <b>{0}</b> to the right. This makes the storage request products until it gets filled up to the green slider.
	TutorialOnStorage__part4	For storages that you do not want full (such as {0}, pictured below), you can use the <b>{1}</b> slider to set the threshold which vehicles will automatically retrieve materials and store them at another available storage.
	TutorialOnStorage__part5	Note that the red/green sliders have no effect on connected transports. For example, a storage set to <b>{0}</b> will still continue to output products via connected transports, ignoring any rules set to the storage.
	TutorialOnStorage__part6	You can also <b>set up alerts</b> to be notified if the storage becomes either too full or too empty which would prevent connected machines from performing correctly. This is ideal for alerting you if a critical material providing storage, such as coal to a power plant, is running low.
	TutorialOnStorage__part7	Once machines are connected via transports and a first product is delivered / received, trucks will no longer try to deliver / receive that type of product. You can manually override this behavior via the logistics panel in each machine in {0} and {1} panels.
	TutorialOnStoragesAndTransports__name	Storages with transports
	TutorialOnTerDumping__colorsDesc1	The colored outlines on the designation squares lets you determine many things.
	TutorialOnTerDumping__colorsDesc2	<b>light green square</b>: is accessible and will be used
	TutorialOnTerDumping__colorsDesc3	<b>yellow green square with a red outline</b>: is not accessible yet
	TutorialOnTerDumping__colorsDesc4	<b>darkened green square</b>: already fulfilled and will be ignored
	TutorialOnTerDumping__colorsDesc5	The numbers on the designation indicate the height of the terrain level.
	TutorialOnTerDumping__part1	To dump materials on the terrain, select the <b>dumping designation tool</b> {0} in the bottom toolbar (1). Hover over the terrain to see your starting direction and elevation of the tool (2). Left click and drag to create a dumping designation (3). Important is that <b>dump designations should start at or below terrain</b>, otherwise they cannot be accessed by trucks.
	TutorialOnTerDumping__part10	The {0} has the option to filter what products can be dumped within its managed area. This managed area ignores the global dumping filter which is ideal for restricting what materials can be dumped. For example, you can only allow {1} to be dumped in a specific area by removing it from the global dumping filter and adding it to dumpable products in the {0} window.
	TutorialOnTerDumping__part10Heading	{0} dumping filter
	TutorialOnTerDumping__part2	Dumping designations show what the terrain will look like when completed.
	TutorialOnTerDumping__part3	The {0} key will toggle the designation tool between a sloped designation (1) for placing terrain in an ascending / descending ramp and flat designation (2).
	TutorialOnTerDumping__part4	The {0} key (1) will rotate ramp designations clockwise to choose which direction the slope will go. When snapped to another designation the {0} key just toggles the slope (2).
	TutorialOnTerDumping__part5	The {0} and {1} keys (1) will raise (2) and lower (3) the designation respectively, allowing you to control the target height. Remember that dumping designations with all edges above the terrain cannot be accessed by trucks.
	TutorialOnTerDumping__part7	Trucks dump products automatically. If there is a dumpable product that needs to be disposed of and no machine or storage that accepts it, trucks will automatically navigate to the nearest designation to dump it.
	TutorialOnTerDumping__part8	There are many products that can be dumped. If you are ever curious if a product can be dumped, open the <b>Recipes screen</b> {0} by clicking on the icon in the bottom right (1), navigate to the product (2), and check if dumping is an option for consumption (3).
	TutorialOnTerDumping__part8Heading	What can be dumped
	TutorialOnTerDumping__part9	Global dump filters choose what products can be dumped in designated areas across the island by default. For example, if you only wanted {0} and {1} used as dumping materials, you could remove any other products listed there besides those two.
	TutorialOnTerDumping__part9Heading	Global dump filters

	Context	English	Romanian
	TutorialOnSmelting__part1	The {0} allows smelting products such as ores and scrap into molten materials. The {1} can be used to cast molten materials to slabs.
	TutorialOnSmelting__part2	In order to produce <b>iron plate</b> you can use {0} gathered from the abandoned buildings nearby. Later on you will be able to set up a mining operation to smelt {1} directly.
	TutorialOnSmelting__part3	Build a {0} and 2x {1}. Connect them together using {2}. The molten channels are needed since the molten iron is too hot to be transported by trucks.
	TutorialOnSmelting__part4	Build and attach a {0} to the {1} either directly or via pipe (which can be found in the <b>transports</b> category).
	TutorialOnSmelting__part6	Since you don’t have access to coal mining yet, build a {0} to produce <b>coal</b> from wood. Don’t forget to attach a {1} to it as well. You can even share the same {1} which is used for {2}. To learn how to get <b>wood</b>, read the tutorial for {3}.
	TutorialOnSmelting__part7	Watch the furnace recipe in progress whilst trucks automatically supply it with {0} and coal. Iron slabs produced in a {1} will be stored there until trucks can find a place for them to be delivered. Later, you will be able to unlock and build conveyor belts to deliver iron directly to your production buildings or storage.
	TutorialOnStoragesAndTransports__name	Storages with transports
	TutorialOnStorage__part1	It is beneficial to use conveyor belts and pipes to transport goods from production buildings to storages and let trucks to balance the inventory between storages. This helps keep truck utilization high since they can always travel fully loaded. It also gives machines an extra input and output buffer for uninterrupted operation.
	TutorialOnStorage__part2	For example, {0} can benefit by having {1} and {2} storage silos attached via conveyor belts.
	TutorialOnStorage__part3	A storage unit will not actively request products from trucks by default. To change this, drag the green slider marked as <b>{0}</b> to the right. This makes the storage request products until it gets filled up to the green slider.
	TutorialOnStorage__part4	For storages that you do not want full (such as {0}, pictured below), you can use the <b>{1}</b> slider to set the threshold which vehicles will automatically retrieve materials and store them at another available storage.
	TutorialOnStorage__part5	Note that the red/green sliders have no effect on connected transports. For example, a storage set to <b>{0}</b> will still continue to output products via connected transports, ignoring any rules set to the storage.
	TutorialOnStorage__part6	You can also <b>set up alerts</b> to be notified if the storage becomes either too full or too empty which would prevent connected machines from performing correctly. This is ideal for alerting you if a critical material providing storage, such as coal to a power plant, is running low.
	TutorialOnStorage__part7	Once machines are connected via transports and a first product is delivered / received, trucks will no longer try to deliver / receive that type of product. You can manually override this behavior via the logistics panel in each machine in {0} and {1} panels.
	TutorialOnTerDumping__colorsDesc1	The colored outlines on the designation squares lets you determine many things.
	TutorialOnTerDumping__colorsDesc2	<b>light green square</b>: is accessible and will be used
	TutorialOnTerDumping__colorsDesc3	<b>yellow green square with a red outline</b>: is not accessible yet
	TutorialOnTerDumping__colorsDesc4	<b>darkened green square</b>: already fulfilled and will be ignored
	TutorialOnTerDumping__colorsDesc5	The numbers on the designation indicate the height of the terrain level.
	TutorialOnTerDumping__part1	To dump materials on the terrain, select the <b>dumping designation tool</b> {0} in the bottom toolbar (1). Hover over the terrain to see your starting direction and elevation of the tool (2). Left click and drag to create a dumping designation (3). Important is that <b>dump designations should start at or below terrain</b>, otherwise they cannot be accessed by trucks.
	TutorialOnTerDumping__part10	The {0} has the option to filter what products can be dumped within its managed area. This managed area ignores the global dumping filter which is ideal for restricting what materials can be dumped. For example, you can only allow {1} to be dumped in a specific area by removing it from the global dumping filter and adding it to dumpable products in the {0} window.
	TutorialOnTerDumping__part10Heading	{0} dumping filter
	TutorialOnTerDumping__part2	Dumping designations show what the terrain will look like when completed.
	TutorialOnTerDumping__part3	The {0} key will toggle the designation tool between a sloped designation (1) for placing terrain in an ascending / descending ramp and flat designation (2).
	TutorialOnTerDumping__part4	The {0} key (1) will rotate ramp designations clockwise to choose which direction the slope will go. When snapped to another designation the {0} key just toggles the slope (2).
	TutorialOnTerDumping__part5	The {0} and {1} keys (1) will raise (2) and lower (3) the designation respectively, allowing you to control the target height. Remember that dumping designations with all edges above the terrain cannot be accessed by trucks.
	TutorialOnTerDumping__part7	Trucks dump products automatically. If there is a dumpable product that needs to be disposed of and no machine or storage that accepts it, trucks will automatically navigate to the nearest designation to dump it.
	TutorialOnTerDumping__part8	There are many products that can be dumped. If you are ever curious if a product can be dumped, open the <b>Recipes screen</b> {0} by clicking on the icon in the bottom right (1), navigate to the product (2), and check if dumping is an option for consumption (3).
	TutorialOnTerDumping__part8Heading	What can be dumped
	TutorialOnTerDumping__part9	Global dump filters choose what products can be dumped in designated areas across the island by default. For example, if you only wanted {0} and {1} used as dumping materials, you could remove any other products listed there besides those two.

	Context	English	Romanian
	TutorialOnTerDumping__colorsDesc1	The colored outlines on the designation squares lets you determine many things.
	TutorialOnTerDumping__colorsDesc2	<b>light green square</b>: is accessible and will be used
	TutorialOnTerDumping__colorsDesc3	<b>yellow green square with a red outline</b>: is not accessible yet
	TutorialOnTerDumping__colorsDesc4	<b>darkened green square</b>: already fulfilled and will be ignored
	TutorialOnTerDumping__colorsDesc5	The numbers on the designation indicate the height of the terrain level.
	TutorialOnTerDumping__part1	To dump materials on the terrain, select the <b>dumping designation tool</b> {0} in the bottom toolbar (1). Hover over the terrain to see your starting direction and elevation of the tool (2). Left click and drag to create a dumping designation (3). Important is that <b>dump designations should start at or below terrain</b>, otherwise they cannot be accessed by trucks.
	TutorialOnTerDumping__part10	The {0} has the option to filter what products can be dumped within its managed area. This managed area ignores the global dumping filter which is ideal for restricting what materials can be dumped. For example, you can only allow {1} to be dumped in a specific area by removing it from the global dumping filter and adding it to dumpable products in the {0} window.
	TutorialOnTerDumping__part10Heading	{0} dumping filter
	TutorialOnTerDumping__part2	Dumping designations show what the terrain will look like when completed.
	TutorialOnTerDumping__part3	The {0} key will toggle the designation tool between a sloped designation (1) for placing terrain in an ascending / descending ramp and flat designation (2).
	TutorialOnTerDumping__part4	The {0} key (1) will rotate ramp designations clockwise to choose which direction the slope will go. When snapped to another designation the {0} key just toggles the slope (2).
	TutorialOnTerDumping__part5	The {0} and {1} keys (1) will raise (2) and lower (3) the designation respectively, allowing you to control the target height. Remember that dumping designations with all edges above the terrain cannot be accessed by trucks.
	TutorialOnTerDumping__part7	Trucks dump products automatically. If there is a dumpable product that needs to be disposed of and no machine or storage that accepts it, trucks will automatically navigate to the nearest designation to dump it.
	TutorialOnTerDumping__part8	There are many products that can be dumped. If you are ever curious if a product can be dumped, open the <b>Recipes screen</b> {0} by clicking on the icon in the bottom right (1), navigate to the product (2), and check if dumping is an option for consumption (3).
	TutorialOnTerDumping__part8Heading	What can be dumped
	TutorialOnTerDumping__part9	Global dump filters choose what products can be dumped in designated areas across the island by default. For example, if you only wanted {0} and {1} used as dumping materials, you could remove any other products listed there besides those two.
	TutorialOnTerDumping__part9Heading	Global dump filters

Loading…

No matching activity found.

Browse all component changes

Things to check

Variants

There are 17 variants of this string.

Glossary

English	Romanian
No related strings found in the glossary.

String information

Context

TutorialOnTerDumping__colorsDesc2

Source string comment

String age

a year ago

Source string age

a year ago

Translation file

ro.po, string 2759